Modify
Placement Type
Displays all the placement types. The components listed in each placement type are based on the piping specification and nominal diameter of the object selected along with the geometry at the insertion location. By default, Specification is selected in the Placement Type box.
Specification
Places components based on what is defined in the piping specification.
Instruments
Currently not implemented.
Specialties
Currently not implemented.
Catalog Tags
Currently not implemented.
Design Basis Tags
Currently not implemented.
Short Code
Specifies the short code associated with the object.
Option Code
Displays the option for the selected component. In addition, the Option list contains any options defined in the piping specification for the selected short code. Selecting a value from the Option list updates the objects.
Position and Orientation
Rotation Angle
Specifies the rotation angle about the pipe or axis for the component.
Move
Moves the selected object.
Move From Position (Ctrl + T)
Specifies the point from which to start the move.
Move To Position (T)
Specifies the point at which to finish the move.
No Constraint (CTRL + 6)
Objects are free to move in any direction.
East
Y-axis and Z-axis coordinates are locked. Object moves freely along the X-axis.
North
X-axis and Z-axis coordinates are locked. Object moves freely along the Y-axis.
Elevation
X-axis and Y-axis coordinates are locked. Object moves freely along the Z-axis.
Elevation Plane (CTRL + 1)
Z-axis coordinate is locked. Object moves freely in the X-Y coordinate plane.
East-West Plane (CTRL + 3)
X-axis coordinate is locked. Object moves freely in the Y-Z coordinate plane.
North-South Plane (CTRL + 2)
Y-axis coordinate is locked. Object moves freely in the X-Z coordinate plane.
Rotate
Rotates the selected component.
Angle Step
Specifies the angle about the axis that the object rotates when you select Step Rotation . Enter a value in the Angle Step box, or select a blank space in the control panel to remove the input focus from the box.
Press G to set the focus to the active graphic view.
Press CTRL+LEFT to rotate the object clockwise one step about the Axis.
Press CTRL+SHIFT+LEFT to rotate the object counter-clockwise one step about the Axis.
Step Rotation
Rotates the object corresponding to the defined angle one step about the active axis. This control is not available if Angle Step is undefined or is set to zero.
Select a blank space in the control panel to remove the input focus, and then press G to set the focus to the active graphic view.
Press SHIFT to rotate the object counter-clockwise.
Run
Displays read-only information about the parent run.
Parts
Click the Parts drop-down arrow to display a list of pipe parts related to the selected part. Select a part to open the Modify Pipe Component dialog and edit the pipe component properties.
Completion
Cancel (ESC)
Cancels all changes and exits the command.
Finish (CTRL + ENTER)
Saves all changes and exits the command.
Finish and Modify (CTRL + SHIFT + ENTER)
Saves all changes, and then selects the objects for modification.