Preparing for the Upgrade - Intergraph Smart 3D - Installation & Upgrade

Intergraph Smart 3D Upgrading to 14

Language
English
Product
Intergraph Smart 3D
Subproduct
Upgrade Guide
Search by Category
Installation & Upgrade
Smart 3D Version
14

All Cases A, B, C and D

  • Unless otherwise stated, the steps in this section apply to all cases and must be performed BEFORE starting the upgrade process.

  • Unless otherwise stated, you must perform the steps in this section on a workstation on which 13.1 is installed, as well as the latest Hot Fixes.

  • To help diagnose upgrade problems, move all generated logs and reports in this section to a common location where you can easily access them. Keep track of all changes done during the upgrade process. Good practice is to take notes of any steps you take so others can easily track down all the changes and actions.

  • If unresolved or unknown errors remain after performing the steps in this section, contact Hexagon support.

  • For Smart 3D configurations in an integrated environment:

    • SmartPlant Foundation databases must be upgraded/migrated to version 10.0 before upgrading the databases to 14 Update 1. For assistance with upgrading SmartPlant Foundation databases, refer to SmartPlant Foundation Upgrade.

    • HxGN SDx databases must be upgraded to Update 52 or greater to support the future upgrade to HxGN SDx2, which is the supported platform for 14 Update 1. For assistance with upgrading HxGN SDx databases, refer to HxGN SDx Upgrade.

  • In all cases, ensure that you are pointing to the SharedContent (Symbols) folder for the version to which you are upgrading your model.

  • Your upgrade of the Smart 3D configuration uses the content on your symbol share, and that content should be made up to date BEFORE migrating the model to the target version.

You can refer to these documents to complete this section.