Support vessels with 0 degree oriented lugs - Intergraph Smart 3D - Help

Intergraph Smart 3D Structure

Language
English
Product
Intergraph Smart 3D
Subproduct
Structure
Search by Category
Help
Smart 3D Version
11 (2016)

Show me

Support vessels with 0 degree lugs AGIF

  1. Click Place Vessel Supports Command on the vertical toolbar.

  2. Select the vessel around which to place the supports.
    -OR-
    Key in the Easting and Northing coordinates of the vessel's center.

    Support vessels with 0 degree lugs STEP EQP SELECT

  3. Set Lug Orientation to 0 Degrees.

  4. Key in the clearance between the side of the vessel and the support members being placed.

  5. Select a system, type, section, and cardinal point for the support members. This command only supports the placement of W, M, HP, S, C, MC, BUI, BUC, BUTee, BUIUE, and BUBoxFM sections.

  6. Select the four main support members in clockwise order.

    Support vessels with 0 degree lugs STEP MEMBERS

  7. Click Finish.

    Support vessels with 0 degree lugs STEP FINISH