Place horizontal cross bracing - Intergraph Smart 3D - Help

Intergraph Smart 3D Structure

Language
English
Product
Intergraph Smart 3D
Subproduct
Structure
Search by Category
Help
Smart 3D Version
11 (2016)

Show me

Place Horizontal Cross Bracing

  1. Click Place Bracing Command on the vertical toolbar.

  2. In the Bracing Type box, select Cross.

  3. In the Type category box, select the cross bracing member type category to place.

  4. In the Type box, select the cross bracing member type to place.

  5. Set the Section Name, Cardinal Point, and Angle options as required.

    SHARED Tip You can set the beta angle relative to your rotated coordinate system by activating PinPoint and selecting the rotated coordinated system as the active coordinate system in the Coordinate System box.

  6. Select the first member to support the cross bracing. This member is one of the "side" members to which the bracing connects.

    Place Horizontal Cross Bracing Side 1

  7. Select the second member to support the cross bracing. This member is the other "side" member to which the bracing connects.

    Place Horizontal Cross Bracing Side 2

  8. Optionally, select one or two members to define the extent of the cross bracing. If you do not select these members, the software uses the end locations of the two selected members as the end locations of the cross bracing.

  9. Click Finish.

    Place Horizontal Cross Bracing Finished