Place Ladders Command - Intergraph Smart 3D - Help - Hexagon

Intergraph Smart 3D Structure

Language
English
Product
Intergraph Smart 3D
Subproduct
Structure
Search by Category
Help
Smart 3D Version
13

Places a ladder in the model.

You attach the top of the ladder to an edge of any object. You attach the bottom of the ladder to a plane. The bottom plane must be lower than the top edge. You must also define the position of the ladder along the top edge. There are two methods for defining this position: 1) Select a reference edge or plane that intersects with the top edge and set the horizontal offset distance along the top edge from the intersection point. You can position the ladder on either side of the reference. 2) Define a position for the ladder graphically.

After you define the position of the ladder, the ladder appears in the model. The software automatically calculates the number of rungs.

Because the ladder, the top edge, and the bottom plane are connected, the interference checker service will not find any hard interference between any part of the ladder (safety cage, rung, and so forth) and the top edge object or the bottom plane.

Place Ladder Ribbon

Select Ladder Dialog

What do you want to do?