StructLadders Workbook - Intergraph Smart 3D - Reference Data

Intergraph Smart 3D Structure Reference Data

Language
English
Product
Intergraph Smart 3D
Subproduct
Structure
Search by Category
Reference Data
Smart 3D Version
11 (2016)

The StructLadders.xls workbook defines the ladders that you want to add to your catalog and hence to your model. The ladders that are delivered with the workbook are samples. Do not directly edit the sample ladders to create your custom ladders. We recommend that you copy the sample sheet to a new sheet, and then edit the copy.

When creating your ladders, there are custom attributes and required attributes. You can add your custom attributes using the Custom Interfaces Sheet sheet (described in the Reference Data Guide.) For your custom attributes, you can have the software provide catalog lookups in the graphical interface for an attribute value. For example, if you have a custom attribute for the material, add the suffix "_SPSMaterial" to the attribute name, for example, Material_SPSMaterial. When the user selects the attribute in the ladder properties dialog box, the software displays the materials defined in the catalog for the user to select from. Four lookups are supported; replace XXX below with your attribute name:

  • XXX_SPSSectionName - Displays section names available in the catalog.

  • XXX_SPSSectionRefStandard - Displays section reference standards available in the catalog.

  • XXX_SPSMaterial - Displays materials available in the catalog.

  • XXX_SPSGrade - Displays material grades available in the catalog.

The required attributes used by IJSPSCommonStairLadderProperties interface must be defined for each ladder part class that you define in the workbook. The required attributes are:

Angle

Enter the angle of inclination between the bottom support and the side frame. This angle is the slope of the ladder.

Bottom Extension

Enter the distance between the selected bottom plane and the start, or bottom, of the ladder. This distance must be a positive number. You cannot extend a ladder below the bottom plane using this property.

Bottom Hoop Level

Enter the dimension for the distance between the bottom of the hoop and the bottom of the ladder.

Custom Prog ID

Enter the registered program identifier.

Envelope Height

Enter the operation envelope height for the ladder. This dimension is used by interference checking.

Flare Clearance

Enter the clearance dimension for the hoop flare.

Flare Radius

Enter the radius dimension for the hoop flare.

Flare ShDim1

Enter the ShDim1 dimension for the hoop flare.

Flare ShDim2

Enter the ShDim2 dimension for the hoop flare.

Flare ShDim3

Enter the ShDim3 dimension for the hoop flare.

Height

Enter the overall projected vertical height, including custom extensions or gaps on the top or bottom. This is the default distance. When placing the ladder, the software calculates the actual distance.

Hoop Bend Radius

Enter the bend radius for the hoop.

Hoop Clearance

Enter the dimension for the hoop clearance.

Hoop Flare Bend Radius

Enter the radius dimension for the hoop flare bend.

Hoop Flare Height

Enter the height dimension for the hoop flare.

Hoop Flare Max Height

Enter the maximum height dimension for the hoop flare.

Hoop Opening

Enter the number associated with the hoop opening type.

Hoop Pitch

Enter the distance between the hoops.

Hoop Plate Thickness

Enter the thickness dimension for the hoop plate.

Hoop Plate Width

Enter the dimension for the hoop plate width.

Hoop Radius

Enter the radius dimension for the safety hoop.

Is Assembly

This value is not currently used by the software. Set to 0.

Is System

This value is not currently used by the software. Set to 0.

Justification

Specifies how the object aligns with the connecting structural objects.

Center

Left

Right

Length

Enter the overall physical length for reporting purposes. This is the default distance. The actual distance is calculated by the ISPSStairSymbolServices component when placing the ladder.

Max Hoop Pitch

Enter the maximum distance between the hoops.

Part Number

Enter a part number for the ladder. The part number must be unique across the entire catalog.

Part Description

Enter a description for the ladder.

Primary Grade

Specifies the primary material grade for the ladder.

Primary Material

Specifies the primary material for the ladder.

Replacement Part Number

Enter the part number associated with the replacement part.

ShDim1

Enter the ShDim1 dimension for the hoop.

ShDim2

Enter the ShDim2 dimension for the hoop.

ShDim3

Enter the ShDim3 dimension for the hoop.

Side

Enter 1 or 0. This attribute is a toggle for the placement side relative to the top support. The Side button on the ribbon bar toggles the value so the default setting is inconsequential.

Side Frame Thickness

Enter the thickness dimension for the side frame.

Side Frame Width

Enter the width dimension for the side frame.

Span

Enter the distance from the top support to the bottom support. This is the default distance. When placing the ladder, the ISPSStairSymbolServices component calculates the actual distance.

Step Diameter

Enter the diameter dimension for the step or rung.

Step Pitch

Enter the maximum allowable vertical distance between the ladder rungs.

Step Protrusion

Enter the dimension for the rung protrusion. This dimension is the distance the ladder rungs extend past the outside side frames.

Support Leg Pitch

Enter the vertical distance, along the ladder, between the wall supports.

Support Leg Thickness

Enter the thickness of the wall support legs. This distance is left-right distance of the support leg if you were standing facing the ladder.

Support Leg Width

Enter the width of the wall support legs.

Symbol Definition

Enter the name of the macro to use to construct the ladder. If you do not enter a value, the software uses the symbol definition at the top of the sheet under Definition.

Symbol Icon

Enter the graphic to use when displaying a preview of the part in the Catalog task. If you do not enter a value , the software uses the symbol icon defined at the top of the sheet under Definition.

Top Extension

Enter the distance the ladder extends above the selected top edge.

Vertical Strap Count

Enter the number of vertical straps.

Vertical Strap Thickness

Enter the thickness dimension for the vertical strap.

Vertical Strap Width

Enter the width dimension for the vertical strap.

VIDim1

This value is not currently used by the SPSLadderMacros.LadderTypeA symbol.

VIDim2

This value is not currently used by the SPSLadderMacros.LadderTypeA symbol.

VIDim3

This value is not currently used by the SPSLadderMacros.LadderTypeA symbol.

Wall Offset

Enter the dimension by which the ladder is offset from the supporting wall. This distance is measured between the center of the rung and the wall.

Width

Enter the width of the ladder rungs. This dimension does not include the width of the side frames or safety hoop and therefore is less than the overall width of the ladder.

With Safety Hoop

Indicates whether the ladder includes a safety hoop.

With Wall Supports

Indicates whether the ladder includes wall supports.

See Also

Traffic Reference Data