Standard
Name
Specifies the name of the manufacturing tab.
Name Rule
Select the naming rule to use to name the manufacturing tab.
DefaultNameRule
Enables the software to automatically name new objects. For a manufacturing tab, the following syntax is used: <"Mfg Tab">-<Workshare Location ID>. For example, "Mfg Tab-1".
User Defined
Requires you to type a name in the Name box.
Part Item
Indicates the name of the catalog part used to create the tab. This property is read only.
Detailed Part Status
Indicates the status of the detailed part. This property is read only.
Manufacturing Object Status
Indicates the status of the manufacturing object. This property is read only.
Production
Bevel on Tab Contour
Specifies the bevel status on the outer contour created by the Manufacturing Tab command.
Ignore
The bevel is not applied.
Driven
The bevel is applied to the portion of the contour touching the driven edge.
Driving
The bevel is applied to the portion of the contour touching the driving edge.
Both
The bevel is applied to the portion of the contour touching either the driven or driving edges.
Bevel on Tab Mark
Specifies the bevel status on the marking between the plate and the tab.
Ignore
The bevel is not applied.
Apply
The bevel is applied along the marking.