Controls various features of the Part Monitor. For more information, see Part Monitor.
Part Monitor Attribute Viewer will take up <fraction> of the window
Indicates the ratio of Part Monitor to total screen. This is calculated from the Part Monitor's usual position on the right side of the window. The default value is 1/4.
Activate Part Editor
Indicates whether the Part Editor is available. By default, this option is not selected.
Include GUIDs in reports
Indicates whether GUID data is included with the rest of the RAD data. The GUIDS always change which can cause confusion if you are using a comparison engine to look for very specific problems in the saved or loaded data. By default, this option is not selected.
Dump SHA file
This option is not currently available.
RAD Debug Reporting
Indicates whether the RAD data for RAD objects and attributes is dumped just before the RAD objects are converted back to Geom2D objects for persistence. This confirms that the attributes loaded are the same attributes as what was saved, and proves that persistence is working. You can use this to track down any problems. By default, this option is not selected.
Use System Temp
Indicates whether the data is forced to the System %Temp% folder on the client computer. This option is not currently available.
RAD Object Report path
Specifies the path that the software uses for writing the RAD Debug Reporting data. By default, this box is blank.
Detailed performance tracking
Enable All Performance Tracking
Indicates whether all of the performance tracking options are selected. By default, this option is not selected.
Master Load-time
Indicates whether over-all performance numbers are tracked. This option is required to enable any of the other Detailed performance tracking options. By default, this option is not selected.
Symbols
Indicates whether performance times for the placement of symbols, rotation, scaling, moving, and so on are tracked. By default, this option is not selected.
Supporting Functions
Indicates whether performance times for the supporting functions are tracked. Supporting functions are the required functions that do not fit into any of the other categories. For example:
-
Finding points on objects, end-points, start-points, and center-points
-
Getting system settings and selector rule options
-
Setting up and activating layers
-
Managing styles
-
Grouping and ungrouping objects
By default, this option is not selected
Get XML Data
Indicates whether performance times are tracked for getting the XML data and processing it before it is loaded. By default, this option is not selected.
Annotations
Indicates whether performance times are tracked for the placement of annotations, rotation, scaling, moving, and so on. By default, this option is not selected.
RAD Functions
Indicates whether performance times are tracked for RAD functions. By default, this option is not selected.
Load-time Drawing
Indicates whether performance times are tracked for drawing data in the Part Monitor, Annotation Editor, or Part Editor. Examples include drawing lines, arcs, b-splines, circles, contours, markings, annotations, and so on. By default, this option is not selected.
Attributes
Indicates whether performance times are tracked for setting attributes on all RAD objects. This includes contours, markings, symbols, annotations, dimensions, and so on. By default, this option is not selected.