Place Edge Features by Offset Ribbon - Intergraph Smart 3D - Help

Intergraph Smart 3D Structural Detailing

Language
English
Product
Intergraph Smart 3D
Subproduct
Structural Detailing
Search by Category
Help
Smart 3D Version
12 (2018)

Displays the controls used to place edge features by offset.

Select Edges

Select the edge of the plate or profile part at the location for the edge feature.

Select Reference

Select the position from which to start calculating the edge features. This point can be an object in the design or a point.

Define Offsets

Specify the distance between the edge features.

Unlimited

Specifies the same distance between all edge features. For more information, see Offset Unlimited Case Dialog Box.

Table

Specifies unique distances between the features.

Shape

Select the shape for the edge feature from the list. The list of available shapes is determined by the type of part that you have selected and the rules that you have defined.

Rule Based

Enables or disables the Shape list. Selecting this check box disables the Shape list.

  • During initial creation of the feature, click OK on the Unlimited or Table dialog boxes to show selections in the Shape list. To change the feature shape you must clear the Rule Based check box.

  • If the shape is the same for each edge feature, that value displays in the box and a list of other available shapes displays in the list. If you select a different shape, that shape is then applied to all of the selected edge features.

  • If the shapes are not the same for all the selected edge features, then the box is blank and the list displays the available shapes. If you select a shape, that shape is then applied to all of the selected edge features. If you do not select a shape, the software creates the edge features according to the rule default values.

  • If there are no common shapes, the Shape box is disabled and the software creates the edge features according to the rule default values.

Finish

Places the edge features using the defined parameters.

 Cancel

Clears the current selection.

 Accept

Accepts the current selection.