Displays the controls used to place multiple corner features.
Place Multiple Corner Features
Select a plate part on which to place the corner features. You can place the corner features on multiple parts by selecting plate systems, plate parts, assemblies, or blocks.
Finish
Places the corner feature using the defined parameters.
Cancel
Clears the selected plate or profile part.
Accept
Accepts the selected plate or profile part.
Shape
Select the shape for the corner feature from the list. The list of available shapes is determined by the type of part that you have selected and the rules that you have defined.
-
During initial creation of the feature, click Accept to show selections in the Shape list.
-
If the shape is the same for each corner feature, that value displays in the box and a list of other available shapes displays in the list. If you select a different shape, that shape is then applied to all of the selected corner features.
-
If the shapes are not the same for all the selected corner features, then the box is blank and the list displays the available shapes. If you select a shape, that shape is then applied to all of the selected corner features. If you do not select a shape, the software creates the corner features according to the rule default values.
-
If there are no common shapes, the Shape box is disabled and the software creates the corner features according to the rule default values.
Rule Based
Enables or disables the Shape list. Selecting this check box disables the Shape list.