Place concentrated load by relative key-in - Intergraph Smart 3D - Help - Hexagon PPM

Intergraph Smart 3D Structural Analysis

Language
English
Product
Intergraph Smart 3D
Subproduct
Structural Analysis
Search by Category
Help
Smart 3D Version
13
  1. Click Place New Concentrated Load Command .

    Place Concentrated Load Absolute STEP SELECT MEMBER

  2. Select the members on which to place the load.

  3. Click Accept .

  4. Select the load case for the load. Use Create or Modify Load Cases to create new load cases.

    Place Concentrated Load Absolute STEP SELECT CASE

  5. Set the Load and Reference options. For more information on the Load and Reference options, see Learn more about Loads.

  6. Type a value in the Magnitude box.

  7. Set the Position As option to Relative.

    Place Concentrated Load Relative STEP SELECT RELATIVE

  8. In the Position box, type the relative position of the load from the start of the member. Valid values are 0.0 to 1.0, with 0.0 being the start of the member and 1.0 being the end of the member. For example, type 0.5 if you want the load at the middle of the member, or type 0.333 if you want the load a third of the member length from the start of the member.

    Place Concentrated Load Relative STEP RELATIVE DISTANCE

  9. Click Accept .

  10. Click Finish.

    Place Concentrated Load Absolute STEP FINISH