Add segments to a path - Intergraph Smart 3D - Help

Intergraph Smart 3D Space Management

Language
English
Product
Intergraph Smart 3D
Subproduct
Space Management
Search by Category
Help
Smart 3D Version
11 (2016)
  1. Click Select .

  2. Select the volume for which you want to modify the path.

    You can modify the volume's path only if you created that volume using Place Volume Along Path Command .

  3. Click Path .

    The software displays the path in yellow.

  4. To add one or more segments to the path, click Create.

  5. Click the point on the existing path where you want to insert the new segment. You can use PinPoint Command , Point Along Command , and the SmartSketch relationship indicators when defining your path.

    • You can change the plane for the path by selecting a different plane in the Plane list.

    • To change the segment from a straight line to an arc, click Arc by 3 Points in the Path Type list, and then click three points to define the arc.

    • To switch back to a straight line after sketching an arc, click Line in the Path Type list.

    • To break the path, click No Line in the Path Type list.

  6. Click to place other points and add to the path as needed. To change the turn type for the corner, click a different turn type in the Turn Type list, and define the dimensions for the turn in the Value box. 

  7. Click Finish to accept the path changes.

  8. Click Finish to modify the volume.