Defines properties associated with the point cloud model type you are modifying.
Model Type
Specifies a point cloud model type. This is a read-only field.
Server Name
Specifies a server name used to establish the connection for the point cloud model type. This is applicable for JetStream and CyEnterprise model types only.
Model Source
Specifies the point cloud model data to import.
Model Name
Specifies a model name. This is a read-only field.
Description
Specifies a description of the model.
Interference Detection
Specifies whether the point cloud model type participates in interference detection. This field is enabled only at the Host location.
Reference Point
Specifies easting, northing, and elevation of a point in the source reference model relative to the global coordinate system origin (0, 0, 0) of the active model. This point could be considered as the origin or anchor point of the reference model used to position and orient the reference model in the active model coordinate space. The easting, northing, and elevation of the reference point can be specified in any of the supported units.
Easting
Specifies the easting coordinate to position the reference point cloud model.
Northing
Specifies the northing coordinate to position the reference point cloud model.
Elevation
Specifies the elevation coordinate to position the reference point cloud model.
Units
Specifies the units of measure for calculating the move. You can select the units of measure from the list. The default is meters (m).
Selection of the distance unit is temporary. It is used for the current positioning
only, and it is not stored in the database or any session defaults. If you select
units other than the default (m), be sure to select the same units for subsequent modification to obtain correct
results.
Point Cloud Model Transformation
Specifies the rotation angles, scale factor, and move vector that the software uses in the transformation. These values are related to the global coordinate system.
If the point cloud does not support point cloud transformation, the software deactivates
options related to transformation.
Rotation
Rotates the reference point cloud model. Rotation is calculated around the origin of the attached point cloud model (reference point). The software measures rotation in the clockwise direction from the North axis.
East Angle (deg)
Specifies the angle in degrees to rotate the reference point cloud model about the east axis of the active model.
North Angle (deg)
Specifies the angle in degrees to rotate the reference point cloud model about the north axis of the active model.
Up Angle (deg)
Specifies the angle in degrees to rotate the reference point cloud model about the up axis of the active model.
Target Point
Specifies the position of the reference point cloud model.
Easting
Specifies the distance east to position the reference point cloud model.
Northing
Specifies the distance north to position the reference point cloud model.
Elevation
Specifies the up distance to position the reference point cloud model.
Units
Specifies the units of measure for calculating the move. You can select the units of measure from the list. The default is meters (m).
-
You cannot select a model type other than the one already attached.
-
You can register (attach) the point cloud models at the Satellite location. The software replicates the properties related to the point cloud model in the database from the Host to Satellite location. Except for the Server Name, the software replicates all of the properties related to the point cloud model on the Host and Satellite locations. At Satellite location, you can modify or update all of the information related to point clouds except for Interference Detection.
-
From Satellite location, if you want to work with a JetStream model type that is attached at Host location, then you must specify a Server that contains the respective model type at Satellite location. The software does not replicate the Server name between the Host and Satellite locations. You must specify the Server name as and when required at the respective locations.
-
Copy the files to the Satellite location to synchronize the point cloud data. Verify that the point cloud software and other related software are installed at the Host and Satellite locations.
-
Specify a complete path for the folder. The software does not accept relative paths such as [Reference Data Folder]\SharedContent.
-
Except Server Name and Description, all the properties related to point cloud models is disabled at Satellite location for the model attached at Host location and vice versa.
-
You cannot delete a point cloud model that is registered at the Host from the Satellite location. Likewise, you cannot delete a point cloud model that is registered at the Satellite location from the Host location.