Rule Variables (Edit Rule Settings Dialog) - Intergraph Smart 3D - Help

Intergraph Smart 3D Planning

Language
English
Product
Intergraph Smart 3D
Subproduct
Planning
Search by Category
Help
Smart 3D Version
12 (2018)

Variables

Specifies the name of the rule variable.

Distance Tolerance

Compares distance related properties such as length and width. This option applies to Plates, Profiles, Collars, Brackets, and Members object types.

Thickness Tolerance

Compares thickness property of Plates, Collars, and Brackets object types.

Area Tolerance

Compares area related properties such as area and surface area. This option applies to Plates, Profiles, Collars, Brackets, and Members object types.

Volume Tolerance

Compares part volumes. This option applies to Profiles and Members object types.

Angle Tolerance

Compares bevel angle properties. This option applies to Plates, Profiles, Collars, Brackets, and Members object types.

Weight Tolerance

Compares properties like dry and wet weight. This option applies to applicable to Plates, Profiles, Collars, Brackets, and Members object types.

Flipping Part

Checks whether a part can be flipped for the geometry comparison. This option applies to Plates, Collars, and Brackets object types.

Bevel Validation Level

If Bevel Validation Level is 1, then the software compares common properties. If Bevel Validation Level is other than 1, then the software compares additional properties such as secondary bevel depth and angles. This option applies to Plates, Profiles, Collars, Brackets, and Members object types.

Units

Initiates the units of the rule variable.

Values

Specifies the value of the variable.

Start Test Command

Initiates the Test Rules command.

Save As

Prompts you to name the rule settings and save them in a required location.

Save

Saves the rule setting in the current location.

Close

Closes the Edit Rule Setting dialog box.