Occurrence Tab (Pipe Generic Occ Properties) - Intergraph Smart 3D - Help

Intergraph Smart 3D Piping

Language
English
Product
Intergraph Smart 3D
Subproduct
Piping
Search by Category
Help
Smart 3D Version
12.1 (2019)
SmartPlant Foundation / SDx Version
10

Displays and defines the general properties of the selected generic piping component.

Generic piping component properties are divided into different categories: Standard, Fabrication and Construction, and Weight and CG. You can use the Category option to select a category for which you want to define values.

Standard

Name

Displays the name of the generic piping component. Replace Me [<short code or tag>].

Pipe run

Displays the name of the parent pipe run to which the generic piping component belongs to.

Type

Displays the object's short code. The list of available short codes is based on the piping specification and nominal diameter of the object selected along with the geometry at the insertion location.

Option

Displays a list of options that you can use instead of the selected object. If no options exist, this field just displays Default. The Option list contains any options defined in the piping specification for the short code selected in the Type list. For example, if you are looking at a valve part, the Option list contains other valve parts, such as one with a higher-pressure rating, that you can use here. Selecting a value from the Option list updates the object.

Tag

Displays the engineering tag if it is a tagged component.

Base/Mating Part

Specifies whether the selected object is a base part or a mating part. If the object is a mating part, you can use this option to change the object to a base part. Use caution however, because after a mating part has been changed to a base part, it cannot be changed back to a mating part again.

Component Type

Specifies the commodity type short code for the generic piping component.

PartClassName

Specifies the part class name of the generic piping component.

ContractorCommodityCode

Specifies the commodity code of the source component.

ShortMaterialDescription

Specifies the material description of the source component.

LongMaterialDescription

Specifies the material description of the source component.

CommodityClass

Specifies the commodity class of the source component.

CommoditySubClass

Specifies the commodity sub class of the source component.

CommodityType

Specifies the source component commodity type. Valid codes and short descriptions are listed in the AllCodeLists.xls workbook on the PipingCommodityType sheet in the Codelist Number column.

Maximum Outer Diameter

Specifies the component's maximum outer diameter for the piping port.

GeometryType

Specifies the geometry type code for the generic piping. Valid codes are listed in the AllCodeLists.xls workbook on the GeometryType sheet in the Codelist Number column.

Reporting Requirement

Select the reporting requirements for the object. You can specify that the object is reported or not reported. An example of an object that you might not want reported is a spacer for a valve. You must order the valve, but need not order the spacer as the spacer comes with the valve.

Reporting Type

Specifies the reporting type. The options that are available here depend on what you select for the Reporting Requirement.

The glyph indicates that the reporting type for the part is determined by the specification. After you modify the reporting type, the glyph is no longer visible.

Face to Face

Specifies the distance from the port 1 face to the port 2 face.

Face to Center

Specifies the distance from the face of the port to the center of the part.

Face 1 to Center

Specifies the length from the port 1 face to center of the component.

Face 2 to Center

Specifies the length from the port 2 face to center of the component.

Branch Reporting Ownership Type Basis

Specifies who set the branch reporting ownership. This could be a user or Smart 3D. This option is used by the software when an administrator synchronizes the model with the catalog. The list is defined by the FabricationTypeBasis codelist.

Fabrication and Construction

Fabrication Requirement

Specifies the fabrication requirement for the object. To change the options on the list, edit the Fabrication Type select list in Catalog.

Rule Driven

Specifies that a rule drives the value. This is the default option. Click to switch to User Driven .

User Driven

Allows you to select a value. Click to switch to Rule Driven .

Fabrication Type

Specifies the type of fabrication for the object. To change the options on the list, edit the Fabrication Type select list in Catalog.

Rule Controlled

Specifies that a rule defined for a parent property controls the value. If Rule Controlled does not display, you can select a value.

Construction Requirement

Specifies the construction requirement for the object. To change the options on the list, edit the Construction Requirement select list in Catalog.

Construction Type

Specifies the type of construction for the object. To change the options on the list, edit the Construction Type select list in Catalog.

Weight and CG

Displays the center-of-gravity and the weight of the selected object. The center-of-gravity locations are displayed relative to the active coordinate system along the X-, Y-, and Z-axes. The weight value that is displayed in the properties dialog is calculated as the material density multiplied by the object's solid volume. Therefore, the material of the object affects the weight value that is displayed here. Check the material assigned to the object if the weight displayed is an improbable value. For the most accurate weight calculation, use Tools > Run Reports.

Dry Weight

Specifies the dry weight of the object.

Wet Weight

Specifies the wet weight of the object.

The Wet Weight is the sum of Dry Weight and the weight of the fluid inside a piping object. The dry weight and fluid weight values are catalog values entered on the part sheet for the object.

Dry CG X

Specifies the X-axis location of the dry center-of-gravity.

Dry CG Y

Specifies the Y-axis location of the dry center-of-gravity.

Dry CG Z

Specifies the Z-axis location of the dry center-of-gravity.

Wet CG X

Specifies the X-axis location of the wet center-of-gravity.

Wet CG Y

Specifies the Y-axis location of the wet center-of-gravity.

Wet CG Z

Specifies the Z-axis location of the wet center-of-gravity.

See Also

Relationships Tab
Connections Tab
Configuration Tab
Notes Tab