-
Click Insert Component Command on the vertical toolbar.
-
Select the component type and option in the Type and Option boxes.
-
If needed, change the position of the component using Flip, Reference Position, and Angle options on the ribbon.
-
Click Finish.
-
Continue routing the pipe run.
When inserting components on the end feature of an arc pipe, you can use Arc Routing or Straight Routing options on the Insert Component Ribbon to control the orientation of the pipe feature. If you select Arc Routing, then the inserted component is oriented such that you can continue to route an arc pipe feature from the other end of it. If you select Straight Routing, then the inserted component is oriented such that you can continue to route a straight pipe feature from the other end of it.