Insert multiple splits a specified distance apart - Intergraph Smart 3D - Help

Intergraph Smart 3D Piping

Language
English
Product
Intergraph Smart 3D
Subproduct
Piping
Search by Category
Help
Smart 3D Version
12 (2018)
SmartPlant Foundation / SDx Version
10
  1. Click Insert Split Command Insert Split on the vertical toolbar.

  2. For the Split Mode, select Multi Split.

  3. Select the straight pipe or pipe run to split.

  4. Click Takedown or Weld on the ribbon.

  5. Select the type and option for the split in the Type and Option boxes.

  6. In the Pipe Length box, specify the distance between the splits. The default distance is the defined purchase pipe length in the piping specification to which the pipe run (or straight pipe) belongs.

  7. In the Reference box, select whether to measure the distance starting from the start of the pipe run or the end of the pipe run.

  8. Click Finish.

  • Other than performing an immediate undo, the multiple splits have no relationships between them after placement.

  • You cannot place feature-break splits while in multi-split mode.