General Tab (Reference 3D Pipe Properties Dialog) - Intergraph Smart 3D - Help

Intergraph Smart 3D Piping

Language
English
Product
Intergraph Smart 3D
Subproduct
Piping
Search by Category
Help
Smart 3D Version
12 (2018)
SmartPlant Foundation / SDx Version
10

Name

Displays the name of the pipe in the Reference 3D model.

Layer Name

Displays the layer name on which the pipe is contained.

Short Material Description

Displays the short material description for the pipe. The software uses this description in the bill-of-materials part of isometric drawings, for reporting, and for visual feedback to the piping designer for design, construction, and fabrication.

Contractor Commodity Code

Displays the contractor commodity code. This code is used during the design phase.

Component Name

Displays the description of the piping component.

Primary Size

Specifies the fitting size (NPD) of the first piping point.

Secondary Size

Specifies the fitting size (NPD) of the second piping point.

Option

Displays a list of options that you can use instead of the selected object. If no options exist, this field just displays Default. The Option list contains any options defined in the piping specification for the short code selected in the Type list. For example, if you are looking at a valve part, the Option list contains other valve parts, such as one with a higher-pressure rating, that you can use here.

Type

Displays the object's short code. The short code is based on the piping specification and nominal diameter of the object selected along with the geometry at the insertion location.

Dry Weight

Displays the dry weight of the object.

Design Maximum Pressure

Displays the maximum allowable pressure for the pipe.

Design Maximum Temperature

Displays the maximum allowable temperature.

Flow direction

Displays the direction of the fluid flow for the pipe.

Pipe Run Name

Displays the name of the pipe run associated to the pipe.

Spool Name

Displays the name of the piping spool it belongs to.

Nominal Diameter

Displays the nominal pipe diameter (NPD) of the pipe.

Operating Pressure

Displays the operating pressure of the pipe.

Operating Temperature

Displays the operating temperature of the pipe.

Geometry Industry Practice

Displays the source industry standard used in the preparation of the pipe catalog data.

Stock Part Length

Displays the length of the pipe.

Stock Part Cut Length

Displays the cut length of the pipe. Flared lap lengths; and bending elongation, grip, and pull lengths are not applicable to the cut length calculation for a given pipe and are therefore ignored for that pipe.

Fabrication Requirement

Displays whether the pipe requires fabrication.

Fabrication Type

Displays the fabrication code for the pipe.

Construction Status

Displays the construction status of the pipe placed in the model. The default construction status is New.

MTO Reporting Requirements

Displays the reporting requirements for the object, whether the object is reported or not reported.

MTO Reporting Type

Displays the reporting type. The reporting type displayed depends on the Reporting Requirement you choose.

Geometry Industry Standard

Displays the code that represents the source used in the preparation of the catalog data applicable to the object.

Source object type

Displays the name of the type of object.