Sets options for routing flexible pipe.
Pipe Properties
Opens New Pipe Run Dialog in which you can define additional properties that are not available on the ribbon bar.
Start Point
Select the starting pipe end feature, pipe port, or equipment nozzle.
End Point
Select the terminating pipe end feature, pipe port, or equipment nozzle.
Run
Displays existing pipe runs along with the <New Pipe Run>, <New/Continue Run>, <Select from P&ID>, and More options.
Select the pipe run to route or select <New Pipe Run> to create a new pipe run to route. If a new pipe run is created, all runs associated with the parent pipeline selected on the New Pipe Run Dialog appear in the list.
Select <New/Continue Run> to automatically extend an existing pipe run by selecting the end feature of that pipe run. If a run is continued, all runs associated with the pipeline parent of the continued run appear in the list. If you do not select an end feature, the New Pipe Run Dialog automatically activates to create a pipe run.
Select <Select from P&ID> to graphically select a run in a P&ID to route. When you select the run in the P&ID, the software checks to see if the run already exists in the Smart 3D model. If the run does exist, the current run is set to that run. If the run does not exist, the New Pipe Run Dialog displays using values from the run that you selected in the P&ID as the defaults. When you click OK, the run is created, and then correlated to the run in the P&ID.
Select More to select a pipe run that is associated with a different pipeline parent. See Select Pipe Run Dialog.
Assembly Tag
Select the connection option for the flexible pipe.
Assembly Option
Select the assembly option.
Finish
Places the flexible pipe using the parameters that you have specified.
Angle
Displays the angle of the flex hose.
Bend Radius
Displays the bend radius of the flex hose.