Name
Displays the name of the pipe in the Reference 3D model.
Layer Name
Displays the layer name on which the pipe is contained.
Short Material Description
Displays the short material description for the pipe. The software uses this description in the bill-of-materials part of isometric drawings, for reporting, and for visual feedback to the piping designer for design, construction, and fabrication.
Contractor Commodity Code
Displays the contractor commodity code. This code is used during the design phase.
Component Name
Displays the description of the piping component.
Primary Size
Specifies the fitting size (NPD) of the first piping point.
Secondary Size
Specifies the fitting size (NPD) of the second piping point.
Option
Displays a list of options that you can use instead of the selected object. If no options exist, this field just displays Default. The Option list contains any options defined in the piping specification for the short code selected in the Type list. For example, if you are looking at a valve part, the Option list contains other valve parts, such as one with a higher-pressure rating, that you can use here.
Type
Displays the object's short code. The short code is based on the piping specification and nominal diameter of the object selected along with the geometry at the insertion location.
Dry Weight
Displays the dry weight of the object.
Design Maximum Pressure
Displays the maximum allowable pressure for the pipe.
Design Maximum Temperature
Displays the maximum allowable temperature.
Flow direction
Displays the direction of the fluid flow for the pipe.
Pipe Run Name
Displays the name of the pipe run associated to the pipe.
Spool Name
Displays the name of the piping spool it belongs to.
Nominal Diameter
Displays the nominal pipe diameter (NPD) of the pipe.
Operating Pressure
Displays the operating pressure of the pipe.
Operating Temperature
Displays the operating temperature of the pipe.
Geometry Industry Practice
Displays the source industry standard used in the preparation of the pipe catalog data.
Stock Part Length
Displays the length of the pipe.
Stock Part Cut Length
Displays the cut length of the pipe. Flared lap lengths; and bending elongation, grip, and pull lengths are not applicable to the cut length calculation for a given pipe and are therefore ignored for that pipe.
Fabrication Requirement
Displays whether the pipe requires fabrication.
Fabrication Type
Displays the fabrication code for the pipe.
Construction Status
Displays the construction status of the pipe placed in the model. The default construction status is New.
MTO Reporting Requirements
Displays the reporting requirements for the object, whether the object is reported or not reported.
MTO Reporting Type
Displays the reporting type. The reporting type displayed depends on the Reporting Requirement you choose.
Geometry Industry Standard
Displays the code that represents the source used in the preparation of the catalog data applicable to the object.
Source object type
Displays the name of the type of object.