Default Change of Direction Per Spec - Intergraph Smart 3D - Reference Data

Intergraph Smart 3D Piping Reference Data

Language
English
Product
Intergraph Smart 3D
Subproduct
Piping
Search by Category
Reference Data
Smart 3D Version
12 (2018)

The Default Change of Direction rule under the piping material class node defines the default boundaries for change-of-direction fittings. The boundaries defined here are the exceptions per piping materials class to the default boundaries defined in the Default Change of Direction under the Model Rules node.

The DefaultChangeOfDirectionPerSpec sheet in the Single Piping Materials Class Template.xls workbook delivered in the Templates folder defines the default boundaries for change-of-direction fittings. The boundaries defined here are the exceptions per piping materials class to the default boundaries defined in the Default Change of Direction.

Bend Angle From (Required)

Enter the lower boundary for the bend angle. This value must match the Bend Angle To value on the previous row.

Bend Angle To (Required)

Enter the upper boundary for the bend angle. This value must match the Bend Angle From value for the next row.

Functional Short Code (Required)

Enter the functional short code to use to access the piping commodity filter for the change-of-direction fitting.

Functional short codes for change-of-direction fittings are defined on this sheet, not on the Piping Commodity Filter.

Spec Name (Required)

Enter the piping materials class for which you want to define exceptions to the default change-of- direction boundaries. The piping materials class that you enter must be defined on the Piping Materials Classes.

See Also

Piping Materials Class Rules
Define Default Change of Direction per Spec