Equipment Translation Maps - Intergraph Smart 3D - 2016 - Administration

Intergraph Smart 3D PDMS Design and Data Exchange

Language
English
Product
Intergraph Smart 3D
Search by Category
Administration & Configuration
Smart 3D Version
11 (2016)

Use the equipment translation mapping sheets in the S3DPDMSExportMapping.xls workbook to map Smart 3D equipment properties to the correct PDMS equipment attributes. Before exporting Smart 3D equipment model data to PDMS, you must modify these mapping sheets to ensure that the following criteria have been met:

  • All of the catalog equipment objects in the Smart 3D model are mapped to corresponding equipment objects in PDMS.

  • All of the shapes in the Smart 3D model are mapped to corresponding primitives in PDMS.

  • Piping and HVAC nozzles in the Smart 3D model are mapped to corresponding nozzles in PDMS. This is mandatory for the transfer of nozzles from Smart 3D regardless of the options that are defined in the PDMSExportTranslation.ini file.

After all of the mapping is completed in the S3DPDMSExportMapping.xls workbook, run the PDMS Export Validation command to validate the mapping data in the workbook. Any missing entries reported by the validation tool should be resolved. For more information, see PDMS Export Validation.

The following equipment translation maps are delivered in the S3DPDMSExportMapping.xls workbook:

EquipmentClassMap

Maps the supported equipment classes between Smart 3D and PDMS. This is the main mapping sheet for the equipment discipline. For more information, see EquipmentClassMap.

CPSmartEquipmentMap

Maps equipment attributes between Smart 3D and PDMS. For more information, see CPSmartEquipmentMap .

CPEquipmentComptMap

Maps equipment component attributes between Smart 3D and PDMS. For more information, see CPEquipmentComptMap .

CPShapeMap

Contains the mapping between the Smart 3D Shape class and the equivalent PDMS primitive (GeometricPrimitive class). For more information, see CPShapeMap.

CPPipeNozzleMap

Maps pipe nozzle attributes between Smart 3D and PDMS. For more information, see CPPipeNozzleMap.

CPHVACNozzleMap

Maps HVAC nozzle attributes between Smart 3D and PDMS. For more information, see CPHVACNozzleMap.

CPConduitNozzleMap

Maps conduit nozzle attributes between Smart 3D and PDMS. For more information, see CPConduitNozzleMap.

CPStraightNozzleCatRefMap

Contains concatenated values for NPD, EndPreparation and PressureRating properties, which are mapped to the PDMS CATRef attribute values for piping straight nozzles. For more information, see CPStraightNozzleCatRefMap.

CPElbowNozzleCAtRefMap

Contains concatenated values for NPD, EndPreparation and PressureRating properties, which are mapped to the PDMS CATRef attribute values for piping elbow nozzles. For more information, see CPElbowNozzleCAtRefMap.

CPHvacNozzleCatRefMap

Contains concatenated values for Smart 3D Width, Cross-section, and EndPreparation of the HVAC nozzle, which are mapped to their corresponding nozzle CATRef values in PDMS. For more information, see CPHvacNozzleCatRefMap.

CPStraightConduitNozzCAtRefMap

Contains concatenated values for Smart 3D NPD and EndPreparation of the conduit nozzle, which are mapped to their corresponding nozzle CATRef values in PDMS. For more information, see CPStraightConduitNozzCAtRefMap.

EquipGlobalsMap

Contains mapping for Smart 3D PartNumber, PartClass and NozzleType properties. The first two properties cross-reference their respective value mapping sheets, and the last property cross-references an additional attribute sheet. For more information, see EquipGlobalsMap.

PartNumberValueMap

Maps Smart 3D part numbers to PDMS. A cross-reference to an additional attribute sheet is also provided. For more information, see PartNumberValueMap.

PartNumberAdditionalAttributes

Contains additional properties for Smart 3D part numbers and cross-references to additional attribute sheets containing design parameters. For more information, see PartNumberAdditionalAttributes.

DesParamAdditionalAttrMap

Contains additional properties, or design parameters, for different part numbers. For more information, see DesParamAdditionalAttrMap.

AspectMap

Contains mapping between the codelist value of the Smart 3D aspect and the LEVE value in PDMS. For more information, see AspectMap.

AspectAdditionalAttributes

Contains additional attributes for PDMS LEVE values. For more information, see AspectAdditionalAttributes.

CPShapeValueMap

Contains the mapping between the shape PartClass in Smart 3D and the equivalent PDMS primitive. For more information, see CPShapeValueMap.

CPShapeAdditionalAttributes

Contains additional attributes for PDMS primitives. The part class of the shape is mapped to the corresponding name of the primitive in the CPShapeValueMap sheet. For more information, see CPShapeAdditionalAttributes.

CPNozzleAdditionalAttribute

Maps Smart 3D nozzle parameters to PDMS attributes. For more information, see CPNozzleAdditionalAttributes.

NozzDesParamAdditionalAttrMap

Contains design parameter values for HVAC nozzles. Design parameters for HVAC nozzles vary according to the nozzle cross-section, like rectangular, flat oval, and round. For more information, see NozzDesParamAdditionalAttrMap .