Create a pin jig drawing - Intergraph Smart 3D - Help - Hexagon

Intergraph Smart 3D Orthographic Drawings

Language
English
Product
Intergraph Smart 3D
Subproduct
Drawings and Reports
Search by Category
Help
Smart 3D Version
13

The following procedure steps you through creating a pin jig drawing. This procedure shows how to use the delivered Mfg PinJig component to create a pin jig drawing with two views, including a remarking view, and a pin height report.

  1. Right-click the drawing root in the Management Console and select New > More to open the Add Component Dialog. Select Folder and click OK.

    SHARED Tip You could also select an existing folder in the hierarchy and skip this step.

  2. Right-click the folder and select New > More. On the Add Component Dialog, go to the Manufacturing tab. Select a PinJig drawing component. For example, select the Mfg PinJig component and click OK. The New Mfg PinJig component is added to the folder. This is the component you use to create your PinJig drawings.

  3. Right-click the new component and select Setup on the shortcut menu to display the Setup Dialog.

  4. On the General tab, note the View Builder definition. For the delivered Mfg PinJig component, two Views and one Report are already defined.

  5. You can select a view or report and click Properties to display the View Definition Dialog showing the current property settings for the view or report. Change the properties as needed for the PinJig drawings you are creating.

  6. Go to the Queries Tab (Setup Dialog - Drawings by Rule) tab to set up the query definition for the PinJig drawings. The query definition identifies the objects in the model that will be included in the drawing.

  7. In the Select view type drop-down list, select the view type to which you want the query associated. You can define separate queries per view type or you can use a default query for multiple view types.

  8. Specify a filter to identify the objects used in the query. For example, the graphic below shows that the Pin Jigs filter is being used for the Mfg PinJig view type.

    Notice that the Collation Rule for the Mfg PinJig setup is already set to CollateToMany, which means that the drawings will have one part per view.

  9. Click Apply Filter Apply Filter ICON to run the filter definition. The rest of the dialog updates with additional definition information.

    You can further define the view definition using the buttons at the bottom of the Queries Tab (Setup Dialog - Drawings by Rule).

  10. If you need to edit the template associated with the drawing component, right click the component and select Edit Template. The template associated with the component opens in the SmartSketch Drawing Editor so you can edit the layout and presentation for the drawings you are creating.

  11. After you complete setup of the Mfg PinJig component, right-click the component and select Create Drawings to create the drawing documents. The new documents display. The red X icon indicates that the drawings are out-of-date (the current model information needs to be updated in the drawing views).

  12. Right-click the component again and select Update to update the drawing documents with the information from the model. A dialog shows the update progress.

  13. When the process is complete, review the information in the dialog for any problems that may have occurred, then click OK to close the dialog.

  14. Right-click the document and select the Edit Command to open it in the SmartSketch Drawing Editor.

If you need to create a customized Manufacturing drawing component, create a Drawings by Rule component and define it as a Manufacturing drawing component.