Place a Dimensioned Label - Intergraph Smart 3D - Help - Hexagon

Intergraph Smart 3D Isogen Isometric Drawings

Language
English
Product
Intergraph Smart 3D
Subproduct
Drawings and Reports
Search by Category
Help
Smart 3D Version
13
Isogen Version
13.0(2016)

This workflow demonstrates the ability to place a dimensioned label on a marine mode Steel Order drawing by placing a dimension-like label on two edges of a plate.

  1. Right-click a Steel Order drawing, and click Edit on the shortcut menu. The drawing opens in SmartSketch Drawing Editor.

  2. On the toolbar, click Place a Label .

  3. Use the Object Filter to enable only Plate Parts for selection.

  4. In the Label Name list, select the Block Parent label from the delivered Steel Order folder.

    To pick from a hierarchical list, select More.

  5. Select the Distance Between DistanceBetweenLabel5 dimension label command from the list. The dimensioned label ribbon displays.

  6. Select the edge of a plate to label.

    The first selected object is labeled, not the second.

  7. Select a second edge. For example, select the opposite edge of the plate you selected.

    The second point only determines the length of the dimension line.

  8. After selecting the second object, the correct label will display.

    DimensionLikeLabel

    SHARED Tip You can use custom dimension styles when placing dimension-like labels. See Dimension paper space objects for 3D drawings in the SmartSketch Drawing Editor Help.

  9. Continue placing labels on the drawing if necessary, and right-click to end the command. Save your changes before exiting SmartSketch Drawing Editor.