Topology Tab (Compare with Design Basis Dialog) - Intergraph Smart 3D - Administration & Configuration - Hexagon

Intergraph Smart 3D Integration - SmartPlant Foundation

Language
English
Product
Intergraph Smart 3D
Subproduct
Integration
Search by Category
Administration & Configuration
Smart 3D Version
13
SmartPlant Foundation / SDx Version
10

Displays the child objects of the selected grouping object and indicates both the 3D objects not correlated to the P&ID (design basis) and also the P&ID objects (design basis) not correlated to 3D objects. For example, when you select a pipe run, the Topology tab indicates objects that are correlated and in the same order on the pipe run, as well as objects that are correlated and not in the same order on the pipe run.

This tab is available only for those objects that support correlation and get topology from the design basis.

Selected

Displays the name of the selected object in the 3D model.

The read-only field provides the following information about the correlation for the object you selected in the 3D model:

  • Topology Match - Indicates that the object in the model you selected has a match or correlation with an object in the design basis.

  • Topology Mismatch - Indicates that the object in the model you selected does not have a match or correlation with an object in the design basis.

#

Indicates an index number to reference the object as defined in the design basis (that is, the drawing).

Design Basis Name

States the name of the object in the design basis (for example, a pipe run).

Model Name

States the name of the object in the 3D model.

Correlation Approval Status

Specifies if the component is approved with discrepancies in the three-dimensional data compared with design basis data. Select Topology mismatch approved if components topology mismatch can be ignored. Select Data and Topology mismatches approved if the components data and topology mismatches can be ignored. Select None if you do not want to approve a mismatch.

Copy properties from design basis

Copies properties from the design basis objects to the corresponding 3D objects. This option is not selected by default. Changes made to this option are saved to the session file.

Selecting this option overwrites the 3D object properties with the corresponding correlated design basis object values. Therefore, do not select this option if you do not want to modify the properties of a 3D object.

Changes made to this option are applied to all the commands that use it. For example, if you select this option in the Correlate Automatically dialog box, then this option is also selected in the Correlate with Design Basis and Compare with Design Basis dialog boxes.

Select

Selects a row in the grid. The object highlights in the model.

Close

Closes the Compare with Design Basis dialog box.

If a discrepancy exists on the Topology tab after clicking Update on the Properties tab, you can trace the discrepancy and attempt to resolve it. For example, a discrepancy might be an object routed or placed out of order.