The Intergraph Smart 3D Share Service monitors the model database for changes, such as new or modified objects. Initially, you configure and start this service for the As-Built design model. Doing so sets up a continuous stream of Smart Interop Object data between the model and SDx to perform the initial bulk synchronization of design data to SDx, During project execution, the Share Service settings that you defined for the design model to execute the bulk synchronization of As-Built data to SDx must also be defined for the Change Management model. This enables the Intergraph Smart 3D Share Service to monitor the Change Management model database for changes, such as new or modified objects. When you create or modify a design object in the configured Smart 3D model, the software automatically transmits those changes to the As-Built model in SDx.
You must have administrator permissions for the model you are configuring.
-
Select the model for which you want to configure the settings from the Project Management tree. The model must be registered with a valid SDx server.
The software does not currently support configuring Integration Service settings for
a Change Management model.
-
Select Integration > Configure SDx Integration Settings Command to open the SDx Integration Settings Dialog.
-
Specify the options to configure the settings as needed.
-
Select Save to save your settings in the database.
-
Select OK to close the confirmation message.
If the Integration Service is running at the time you configure your settings, the software begins sending the corresponding model database to SDx. Service-wide log files are written to the temp folder during startup of the synchronization. After the synchronization starts successfully, the model-specific log files are written to either Application Insights (if enabled) or the defined Log File Location (if enabled) as defined in the Integration Service settings.
-
Optionally, you can use a command-line executable to configure service settings.
See Command-line option to configure SDx integration settings in the Intergraph Smart 3D Integration Services Installation and Setup Help.