Install Smart 3D Client Software - Intergraph Smart 3D - Installation & Upgrade

Intergraph Smart 3D Installation

Language
English
Product
Intergraph Smart 3D
Search by Category
Installation & Upgrade
Smart 3D Version
11 (2016)

Prior to installing Smart 3D on a workstation computer, verify that the workstation computer meets the required hardware and software requirements and that all prerequisite software has been installed. For more information, see Smart 3D Workstation Recommendations in the Intergraph Smart 3D Installation Guide. For more information about the prerequisite software, see Loading Prerequisite Software on the Client.

Remove the older version of Smart 3D before loading the new version. For more information, see Remove Smart 3D Software in the Intergraph Smart 3D Installation Guide.

You must have administrator privileges on the computer to install the software. We recommend using the Run as Administrator option.

If you have not already installed and configured SmartPlant License Manager on your computer, we recommend doing so before installing Smart 3D.

  • If you are using material handling mode, you must install Intergraph SmartSketch 2016 (9.0 or later) before installing Smart 3D. If you install Smart 3D first, then Smart 3D will not work properly. You must separately purchase SmartSketch (SGBY297AV).

  • Smart 3D requires the SmartPlant License Manager software for concurrent licensing for both the core Smart 3D product and for each module. This licensing software is delivered on its own DVD that comes with your Smart 3D DVD. For more information about using and configuring concurrent licensing, see the SmartPlant License Manager Installation and User's Guide (SPLMInstall_UserGuide.pdf).

  • During setup, the %temp% value is defined as the user %temp% of the person who runs the setup. In Windows, each user's C:\Documents and Settings\username\Local Settings\Temp is protected from other Windows users. Consequently, you must set the system environment variable TEMP value to a folder location where everyone has write access (for example, c:\temp). For more information about editing system variables, see the Help and Support Center (click Start > Help and Support Center from the Windows task bar).

  1. Insert the Intergraph Smart 3D DVD. If the DVD does not start automatically, right-click Setup.exe in the root folder of the DVD and select Run as administrator.

  2. Click Additional Software, and the select the optional software that you need to install, if any:

    Install SmartPlant Schema Component
    Install PDS Export Tools

  3. Click Back if needed.

  4. Click Full Installation.

  5. Type your name or organization information.

  6. Select the components to install on this computer:

    • Smart 3D Installation - Installs the Smart 3D client component that contains the modeling tasks such as Common, Piping, Equipment, Structure, and so forth.

      • Project Management - Installs the Project Management client used for creating models, managing access control, and upgrading databases. Select this option for an administrator's computer. You must also install the Server Connectivity option (below) and the Microsoft SQL Server client tools. The Microsoft SQL Server client tools are not required on computers where Project Management is not installed or if you are using Oracle as your database provider.

      • Bulkload Reference Data - Installs sample Microsoft Excel reference data workbooks and the utilities needed to bulkload the workbooks into the Catalog task. Select this option for people working with reference data and the Catalog task. You must also install the Server Connectivity option if you select this option.

      • Piping Specification Remote Access Server - Installs the necessary software for correlating piping specification data between Smart 3D and SmartPlant P&ID. This option sets up the computer as a remote access server by registering the SP3DPipingSpecRemoteAccessServer COM+ component. For more information about the P&ID integration capabilities of the software, see Integrating with SmartPlant P&ID in the Intergraph Smart 3D Installation Guide.

        If you select this option, make sure that the Distributed Transaction Coordinator service is not set to Disabled. The Piping Specification Remote Access Server installation will fail if this service is disabled.

      • Database Interference Detection Service - Installs the software required for database interference detection. You must configure this service through Windows Services. Requires the Project Management and the Server Connectivity components. For more information, see Interference Checking Setup.

      • Server Connectivity - Installs required database connectivity components for Project Management, the Bulkload Utility, Piping Specification Remote Access Server, and the Database Interference Detection Service.

      • 64-bit Services - Installs the 64-bit version of the Interference Checking and Drawings Batch Services components.

        64-bit Services cannot be uninstalled individually. You must remove all of Intergraph Smart 3D from the computer to remove the 64-bit Services component.

    • Name Generator Installation - Installs the 32-bit version of the Name Generator. Install this one if you are installing the Name Generator on a computer where the Oracle 32-bit client is installed.

    • Name Generator 64-bit Installation - Installs the 64-bit version of the Name Generator. Install this one if you are installing the Name Generator on a computer running a server operating system, you are using Microsoft SQL Server, or you are installing on an Oracle database server.

      • For more information about which version of the Name Generator you need and about the Name Generator in general, see Name Generator Service Setup.

      • Make sure that the Distributed Transaction Coordinator service is not set to Disabled. Name Generator installation will fail if this service is disabled.

    • Reference Data Installation - Installs the reference data needed to run Smart 3D. You should pick one server on which to install the reference data. Do not install reference data on each client or administrator computer. For more information, see Reference Data Setup.

    • Intergraph Smart 3D PDS Model & Data Translators Installation - Installs the PDS Model & Data Translators (licensed-separately, SEBY801) component that further extends the PDS integration capabilities by allowing you to export Piping, HVAC, Electrical, Equipment, and Structure model data from PDS into Smart 3D. For more information, see Install Smart 3D PDS Model & Data Translators.

    • Intergraph Smart 3D Tribon Interface Installation - Installs the Tribon Interface (licensed-separately, SEBY812) component that allows you to import Tribon Initial Design M3 structural data into Smart 3D in marine mode for planning and outfitting purposes. For more information, see Smart 3D Tribon Interface Setup.

    • Programming Resources Installation - Installs the Programming Resources component which provides developers with the tools necessary to customize the software by creating custom commands or custom programs. For more information, see Programming Resources Setup.

      Serial numbers are used for product identification only. A license key is required to run the software. For more information about installing and using SmartPlant License Manager, see the SmartPlant License Manager Installation and User's Guide (SPLMInstall_UserGuide.pdf).

  7. Read the license agreement. Click to agree to the Software License Agreement, and then click Install.

    The selected options are installed on the computer.

  8. Click Finish.

If you installed Smart 3D on a computer with version 4.5.2 of the .NET Framework installed, you must reboot your computer after installation completes.