Manufacturability Checking Settings Dialog - Intergraph Smart 3D - Help - Hexagon PPM

Intergraph Smart 3D Hole Management

Language
English
Product
Intergraph Smart 3D
Subproduct
Hole Management
Search by Category
Help
Smart 3D Version
13.1

Sets options for the Check Manufacturability process.

Task List

Displays the list of tasks that contains the Check Manufacturability rules defined in the catalog. These tasks allow you to filter the check rules based on the selected task in the Task List.

Rule

Select which rules to process check manufacturability against. There are different rules based on the task selected in the Task List option. Contact Customer Support for help with customizing the XML data file.

Hole Management

The manufacturability checking process includes checking the distance between hole traces; the distance between the hole trace and plate edges (outside), brackets and coamings; and the distance between the hole trace and seamlines, profiles, and openings. Because hole traces can affect the stress of the deck or bulkhead on which they are placed, it is important to check holes before cutting them. See Check Hole Rules.

Piping

The manufacturability checking process includes software simulators for cutting, bending, and coating pipe. An XML data file controls the piping simulators. You can customize this file to reflect the requirements, standards, and equipment of your facility. See Piping Check Manufacturability.

Planning

The manufacturability checking process includes software simulators for planning joints, weld bevels, and slot types on structure. You can customize the planning simulators rules to reflect the requirements, standards, and equipment of your facility. See Check Manufacturability Rules.

Structural Detailing

The checking process includes tee weld chamfer checks based on changes to plate thickness, slot opening angles, and end cut type. See Check Manufacturability Rules.

Structural Manufacturing

The checking process includes margin check on the same port, manufacturing plate and profile check, and shrinkage check.

ProgID

Programming ID of the rule that found the inconsistency. Matches the Rule ProgID of the rule on the Show Manufacturability Inconsistencies Dialog .

Select All

Specifies all available rules.

Clear All

Clears all available rules. You can select rules individually in the list view by clicking the boxes beside the rule names.

Stop checking if a manufacturability error is found

Halts rule processing upon error detection.