Place multiple supports along a feature or a SIO route - Intergraph Smart 3D - Help - Hexagon PPM

Intergraph Smart 3D Hangers and Supports

Language
English
Product
Intergraph Smart 3D
Subproduct
Hangers and Supports
Search by Category
Help
Smart 3D Version
13.1
  1. Click Tools > Point Along Point Along ICON.

  2. Click Reference on the ribbon, and then select the feature or SIO route along which you are planning to place supports.

  3. Identify the point to measure from on the feature or SIO route.

  4. Click Place Support by Point Command on the vertical toolbar.

  5. Select the feature or SIO route to support.

    Place multiple supports along a feature STEP SELECT SUPPORTED

  6. Click Accept .

  7. Select a structure to support the selected feature or SIO route.

    Place multiple supports along a feature STEP SELECT SUPPORTING

  8. Click Accept .

  9. Do one of the following:

    1. If Rule is selected, select the support type in the Type list.

    2. If Rule is not selected, select More in the Type list, and then navigate the catalog browser to locate the appropriate support.

  10. In the Distance box on the Point Along ribbon, specify the distance from the measure-from point that you identified in step 3 to the first support.

    The software displays the first support at the distance that you defined.

    Place multiple supports along a feature STEP DISTANCE

  11. Click in the graphic view to position the first support.

  12. In the Copies box, type the number of supports to place.

  13. Click Finish.

    Place multiple supports along a feature STEP FINISHED