Port Details - Intergraph Smart 3D - Reference Data

Intergraph Smart 3D Hangers and Supports SmartParts Configuration

Language
English
Product
Intergraph Smart 3D
Subproduct
3D Symbols
Search by Category
Reference Data
Smart 3D Version
11 (2016)

Rod Hanger

Port1 – Route

Port Name

Port Type

Size

MinSize

MaxSize

Route

1016 (Pipe Clamp)

Pipe Outside Diameter

Pipe Outside Diameter

Pipe Outside Diameter

Port2 – Wing Mount Point

Port Name

Port Type

Size

MinSize

MaxSize

Wing

1015 (Pin)

Pin or Bolt Diameter

Pin or Bolt Diameter

Pin or Bolt Diameter

Port3 - Side Mount Point

Port Name

Port Type

Size

MinSize

MaxSize

Side

1200(other)

0

-9999

9999

Side Mounted

Graphics are identical to 1, except they are all rotated 90 degrees + Angle3 around the local X coordinate (including clamp body, bolts, and so on). The Pin port, at bolt 1, remains the same. The pipe port orientation changes, so Z points down to the structure for the pipe port. A ClampSide1 port is required on the side of the clamp, for connection to the shoe or post, with the same orientation as the pipe port. If Width3 is defined, the ClampSide1 port is retracted so that a shoe or post of Width3 can connect directly to it. If Height3 is defined, a positive offset is in the Z direction of the ClampSide1 port. If both Height3 and Width3 are set, Height3 is used.

  • On shoe or post

    • Horizontal Single Shoe or Narrow Post

    • Angled Single Shoe or Narrow Post

    • Double Shoe or Wide Post

  • Hanging with Lug, Clevis, Hole, or Threaded hole

    • Side Attachment, Lug, Clevis, Hole, Threaded Shown Upside Down.

Port1 – Route

Port Name

Port Type

Size

MinSize

MaxSize

Route

1016 (Pipe Clamp)

Pipe Outside Diameter

Pipe Outside Diameter

Pipe Outside Diameter

Port2 – Wing Mount Point

Port Name

Port Type

Size

MinSize

MaxSize

Wing

1015 (Pin)

Pin or Bolt Diameter

Pin or Bolt Diameter

Pin or Bolt Diameter

Port3 – Side Mount Point

Port Name

Port Type

Size

MinSize

MaxSize

Shoes

0

-9999

9999

Side

1200 (Other)

Rod Types

The Diameter of the rod for connecting to other components. And it is same as RodDiameter Property.

0

Thickness3

Side

1001 (IntThdRH)

1003 (IntThdLH)

Pin Type

Dimension not defined. Set to -1

Dimension not defined. Set to -9999

Dimension not defined. Set to 9999

Side

1005 (Pin)

Lug Types

Dimension not defined. Set to -1

Dimension not defined. Set to -9999

Dimension not defined. Set to 9999

Side

1007 (Eye)

Side Mounted - Two Side Ports, Angled or Straight

This configuration has two ports on the ClampSide1 and ClampSide2 and it does not include a port on Bolt 1.

If Angle2 is specified, the ports are located on the side of the clamp, separated by the specified angle. These angled ports are oriented as shown below. Angle2 is always less than 180.

If Width3 is specified, the ports are located on the side of the clamp separated by the specified width and these ports are oriented as shown below. Width3 is always less than the outside diameter of the clamp body (that is, less than Diameter1 + 2 x Thickness1).

In case if both Width3 and Angle2 are specified, Width3 is used.

Angle1 and Angle3 can also be used with this configuration.

Port1 – Route

Port Name

Port Type

Size

MinSize

MaxSize

Route

1016 (Pipe Clamp)

Pipe Outside Diameter

Pipe Outside Diameter

Pipe Outside Diameter

Port2 – Side Mount Point

Port Name

Port Type

Size

MinSize

MaxSize

Side

1200 (Other)

0

-9999

9999

Port3 – Side Mount Point

Port Name

Port Type

Size

MinSize

MaxSize

Wing

1200 (Other)

0

-9999

9999

Direct Bolted

In Direct Bolted Clamps, the bolt quantities may all be zero since the hanger rods often takes the place of the bolts. The ports are separated by Width3 and centered in the clamp body and with an offset of Height3 from the pipe centerline as shown below. You can also specify bolts in rows 1 to 6 but the ports are located independently of the bolts in this configuration.

Port1 – Route

Port Name

Port Type

Size

MinSize

MaxSize

Route

1016 (Pipe Clamp)

Pipe Outside Diameter

Pipe Outside Diameter

Pipe Outside Diameter

Port2 – Side Mount Point

Port Name

Port Type

Size

MinSize

MaxSize

Side

1004 (Rod Hole)

Dimension not defined. Set to -1

Dimension not defined. Set to -9999

Dimension not defined. Set to 9999

Port3 – Wing Mount Point

Port Name

Port Type

Size

MinSize

MaxSize

Wing

1004 (Rod Hole)

Dimension not defined. Set to -1

Dimension not defined. Set to -9999

Dimension not defined. Set to 9999

Riser Clamp, Rod Hanger

Port1 – Route

Port Name

Port Type

Size

MinSize

MaxSize

Route

1016 (Pipe Clamp)

Pipe Outside Diameter

Pipe Outside Diameter

Pipe Outside Diameter

Port2 – Wing Mount Point

Port Name

Port Type

Size

MinSize

MaxSize

Side

1005 (Pin)

Pin or Bolt Diameter

Pin or Bolt Diameter

Pin or Bolt Diameter

Port3 – Wing Mount Point

Port Name

Port Type

Size

MinSize

MaxSize

Wing

1005 (Pin)

Pin or Bolt Diameter

Pin or Bolt Diameter

Pin or Bolt Diameter

Riser Clamp on Structure, Socket Clamp, Underground Clamp

Port1 – Route

Port Name

Port Type

Size

MinSize

MaxSize

Route

1016 (Pipe Clamp)

Pipe Outside Diameter

Pipe Outside Diameter

Pipe Outside Diameter

Port2 – Side Mount Point

Port Name

Port Type

Size

MinSize

MaxSize

Side

1200 (Other)

0

-9999

9999

Port3 – Wing Mount Point

Port Name

Port Type

Size

MinSize

MaxSize

Wing

1200 (Other)

0

-9999

9999

Offset Pipe Clamp

Port1 – Route

Port Name

Port Type

Size

MinSize

MaxSize

Route

1016 (Pipe Clamp)

Pipe Outside Diameter

Pipe Outside Diameter

Pipe Outside Diameter

Port2 – Side Mount Point

Port Name

Port Type

Size

MinSize

MaxSize

Side

1200 (Other)

0

-9999

9999