The following graphic illustrates the orientation of the ports and their sizes for the pipe saddle:
If RotY is set, the software rotates the route port about its y-axis, tilting the strap when the strap is joined to the pipe reference port.
Port details and their orientation
Port1 - Route (0,0,0)
Port Type |
Size |
MinSize |
MaxSize |
2 - Route |
Pipe outside diameter |
Pipe outside diameter |
Pipe outside diameter |
Port2 - Steel (0,0, -Bottom Shape height)
Port Type |
Size |
MinSize |
MaxSize |
1011 - Steel |
N/A - Use 0 |
N/A - Use 9999 |
N/A - Use 9999 |
If you join the steel port to the structure, the steel port must be at the BottomShapeHeight. To add a plate below, use BottomOfStrap - Gap1 - Block1Height.