Top Connection Properties - Intergraph Smart 3D - Reference Data - Hexagon PPM

Intergraph Smart 3D Hangers and Supports SmartParts Configuration

Language
English
Product
Intergraph Smart 3D
Subproduct
Hangers and Supports
Search by Category
Reference Data
Smart 3D Version
13.1

Enter the values for these properties for the part to contain a top rod connection. These properties are optional for the standard and J Hanger types but they are required for the Ring Hanger type. The rod connection is always cylindrical and is centered about the rod centerline.

IJUAhsHeight2::Height2

Specifies the height of the top rod connection.

  • Standard and J Hanger Type - This property is optional for standard or J Hanger types and is the distance from the top surface of the band flange to the top of the rod connection.

  • Adjustable Ring Type - Specifies the height from RodTakeOut to the top of the rod connection. By default, this value is 2 X RodDiameter.

IJUAhsDiameter2::Diameter2

Specifies the diameter of the top rod connection.

  • Standard and J Hanger Type - This property is optional for standard or J Hanger type. Enter a value greater than RodDiameter

  • Adjustable Ring Type - Specifies a value greater than RodDiameter. By default, Diameter2 is 1.25 X RodDiameter.