Secondary Steel - Intergraph Smart 3D - Reference Data

Intergraph Smart 3D Hangers and Supports Generic Parts

Language
English
Product
Intergraph Smart 3D
Subproduct
3D Symbols
Search by Category
Reference Data
Smart 3D Version
12.1 (2019)

Hangers and Supports contains steel parts referred to as Secondary Steel. The following secondary steel standards are delivered with the product. See Section Shapes for a listing of the actual section shapes that are available for each steel standard.

All secondary steel depends on a corresponding Structural Steel workbook. The prerequisite Structural Steel workbook is named for each of the equivalent Hangers and Supports workbook below. The prerequisite structural steel workbook should be bulkloaded before bulkloading the hangers and supports steel workbook.

Delivered New Steel Standards

All new delivered Steel standard workbooks require the HS_System_Codelist.xls workbook to be already bulkloaded or it should be bulkloaded at the same time.

AISC LRFD 3.1

Hangers and Supports Workbook: HS_Struct-AISC-LRFD-3.1_Deprecated.xls

Standard Name: AISC-LRFD-3.1

Description: American Institute of Steel Construction - Manual of Steel Construction(LRFD)

Organization: AISC

Date: 2003

Version: 3.1

S3D Structural Workbook Prerequisite: StructCrossSections-AISC-LRFD-3.1.xls

AISC LRFD 3.0

Hangers and Supports Workbook: HS_Struct-AISC-LRFD-3.0.xls

Standard Name: AISC-LRFD-3.0

Description: American Institute of Steel Construction - Manual of Steel Construction(LRFD)

Organization: AISC

Date: 2002

Version: 3.0

S3D Structural Workbook Prerequisite: StructCrossSections-AISC-LRFD-3.0.xls

AISC Metric

Hangers and Supports Workbook: HS_Struct-AISC-Metric.xls

Standard Name: AISC-METRIC

Description: American Institute of Steel Construction - Manual of Steel Construction(LRFD)

Organization: AISC

Date: 2008

Version: 3.1

S3D Structural Workbook Prerequisite: StructCrossSections-AISC-Metric.xls

AISC SHAPES 3.1

Hangers and Supports Workbook: HS_Struct-AISC-SHAPES-3.1.xls

Standard Name: AISC-SHAPES-3.1

Description: American Institute of Steel Construction - Manual of Steel Construction(LRFD)

Organization: AISC

Date: 2003

Version: 3.1

S3D Structural Workbook Prerequisite: StructCrossSections-AISC-SHAPES-3.1.xls

AUST

Hangers and Supports Workbook: HS_Struct-AUST.xls

Standard Name: Aust

Description: Australian Steel Table

Organization: AUST

Date: 2003

Version: 1.0

S3D Structural Workbook Prerequisite: StructCrossSections-AUST.xls

AUST 05

Hangers and Supports Workbook: HS_Struct-AUST-05.xls

Standard Name: AUST-OneSteel-05

Description: Australian Steel Table - 2005 - OneSteel Electronic Catalog Version 2.0.7

Organization: AUST

Date: 2005

Version: 2.0.7

S3D Structural Workbook Prerequisite: StructCrossSections-AUST-05.xls

BS

Hangers and Supports Workbook: HS_Struct-BS.xls

Standard Name: BS5950-1:2000

Description: Structural use of steelwork in buildings data from the Corus Web Site

Organization: BSI

Date: 2000

Version:

S3D Structural Workbook Prerequisite: StructCrossSections-BS.xls

Chile 2000

Hangers and Supports Workbook: HS_Struct-Chile-2000.xls

Standard Name: ICHA-2000

Description: Chile Steel Table As Per ICHA-2000

Organization: ICHA

Date: 2008

Version: 1.0

S3D Structural Workbook Prerequisite: StructCrossSections-Chile-2000.xls

China 2006

Hangers and Supports Workbook: HS_Struct-China-2006.xls

Standard Name: GB

Description: Chinese GB (Guojia Biaozhun) and Standard Steel Tables as noted

Organization: Standardization Administration of China

Date: Varies

Version: 1.0

S3D Structural Workbook Prerequisite: StructCrossSections-China-2006.xls

CISC 7.2

Hangers and Supports Workbook: HS_Struct-CISC-7.2.xls

Standard Name: CISC-7.2

Description: Canadian Institute of Steel Construction - 7th Edition, 2nd printing

Organization: CISC

Date: 2002

Version: 7.2

S3D Structural Workbook Prerequisite: StructCrossSections-CISC-7.2.xls

CISC 8.1

Hangers and Supports Workbook: HS_Struct-CISC-8.1.xls

Standard Name: CISC-8.1

Description: Canadian Institute of Steel Construction - 8th Edition, 1st printing

Organization: CISC

Date: 2002

Version: 8.1

S3D Structural Workbook Prerequisite: StructCrossSections-CISC-8.1.xls

Euro

Hangers and Supports Workbook: HS_Struct-Euro.xls

Standard Name: Euro

Description: European Section Sizes

Organization: Euro

Date: 2002

Version: 1.0

S3D Structural Workbook Prerequisite: StructCrossSections-Euro.xls

EURO OTUA 2002

Hangers and Supports Workbook: HS_Struct-EURO-OTUA-2002.xls

Standard Name: EURO-OTUA-2002

Description: Caractéristiques Géométriques et Statiques OTUA Edition 2002

Organization: OTUA

Date: 2002

Version: 1

S3D Structural Workbook Prerequisite: StructCrossSections-EURO-OTUA-2002.xls

Japan

Hangers and Supports Workbook: HS_Struct-Japan.xls

Standard Name: Japan

Description: Japanese Section Table

Organization: Japan

Date: 2002

Version: 1.0

S3D Structural Workbook Prerequisite: StructCrossSections-Japan.xls

Japan 2005

Hangers and Supports Workbook: HS_Struct-Japan-2005.xls

Standard Name: JIS-2005

Description: Japanese Section Table

Organization: JIS

Date: 2005

Version: 1.0

S3D Structural Workbook Prerequisite: StructCrossSections-Japan-2005.xls

Russia

Hangers and Supports Workbook: HS_Struct-Russia.xls

Standard Name: Russian

Description: Russian Steel Table

Organization: Russia

Date: 2006

Version: 1.0

S3D Structural Workbook Prerequisite: StructCrossSections-Russia.xls

SAISC 2002

Hangers and Supports Workbook: HS_Struct-SAISC-2002.xls

Standard Name: SAISC-2002

Description: South African Institute of Steel Construction

Organization: SAISC

Date: 2002

Version: 1.0

S3D Structural Workbook Prerequisite: StructCrossSections-SAISC-2002.xls

Delivered but Deprecated Steel Standards

The following workbooks have been superseded by the secondary steel workbooks listed above.

AISC LRFD 3.1 Deprecated

This workbook is deprecated and HS_Struct-AISC-LRFD-3.1.xls should be used instead. It is still required for the HS_Assembly.xls assembly library to work.

Hangers and Supports Workbook: HS_HgrAisc-LRFD-3.1_Deprecated.xls

Standard Name: AISC-LRFD-3.1

Description: American Institute of Steel Construction - Manual of Steel Construction(LRFD)

Organization: AISC

Date: 2003

Version: 3.1

S3D Structural Workbook Prerequisite: StructCrossSections-AISC-LRFD-3.1.xls

AISC LRFD 3.0 Deprecated

Hangers and Supports Workbook: HS_HgrAisc_Deprecated.xls

Standard Name: AISC-LRFD-3.0

Description: American Institute of Steel Construction - Manual of Steel Construction(LRFD)

Organization: AISC

Date: 2002

Version: 3.0

S3D Structural Workbook Prerequisite: StructCrossSections-AISC-LRFD-3.0.xls

AUST 05 Deprecated

Hangers and Supports Workbook: HS_HgrAUST-05_Deprecated.xls

Standard Name: AUST-OneSteel-05

Description: Australian Steel Table - 2005 - OneSteel Electronic Catalog Version 2.0.7

Organization: AUST

Date: 2005

Version: 2.0.7

S3D Structural Workbook Prerequisite: StructCrossSections-AUST-05.xls

CISC 7.2 Deprecated

Hangers and Supports Workbook: HS_HgrCISC_Deprecated.xls

Standard Name: CISC-7.2

Description: Canadian Institute of Steel Construction - 7th Edition, 2nd printing

Organization: CISC

Date: 2002

Version: 7.2

S3D Structural Workbook Prerequisite: StructCrossSections-CISC-7.2.xls

Euro Deprecated

Hangers and Supports Workbook: HS_HgrEuro_Deprecated.xls

Standard Name: Euro

Description: European Section Sizes

Organization: Euro

Date: 2002

Version: 1.0

S3D Structural Workbook Prerequisite: StructCrossSections-Euro.xls

EURO OTUA 2002 Deprecated

Hangers and Supports Workbook: HS_HgrEURO-OTUA-2002_Deprecated.xls

Standard Name: EURO-OTUA-2002

Description: Caractéristiques Géométriques et Statiques OTUA Edition 2002

Organization: OTUA

Date: 2002

Version: 1

S3D Structural Workbook Prerequisite: StructCrossSections-EURO-OTUA-2002.xls

Japan Deprecated

Hangers and Supports Workbook: HS_HgrJapan_Deprecated.xls

Standard Name: Japan

Description: Japanese Section Table

Organization: Japan

Date: 2002

Version: 1.0

S3D Structural Workbook Prerequisite: StructCrossSections-Japan.xls