Leg 1 Properties - Intergraph Smart 3D - Reference Data - Hexagon PPM

Intergraph Smart 3D Hangers and Supports Data Driven Assembly

Language
English
Product
Intergraph Smart 3D
Subproduct
Hangers and Supports
Search by Category
Reference Data
Smart 3D Version
13

These properties are used to specify and customize the first leg of the support.

  • Leg 1 properties are only applicable to U, L and T-Frame types.

  • Cap Plate1 properties are added for all the Frame types.

IJUAhsLeg1::Leg1Part

Specifies the steel part number to be used for the first support leg. To select the part number using Leg1Rule, do not type any value for this property.

IJUAhsLeg1Rl::Leg1Rule

Defines an HgrSupportRule that returns a rich hanger beam part number. The hanger rule should exist in the catalog; it can be the name of a rule or a rule ProgID. To select the part number directly using Leg1Part, do not type any value for this property.

IJUAhsLeg1Ang::Leg1OrientationAngle

Specifies the angle of rotation for the first leg of the support. The angle is about the axis of the leg. Allowed values from the hsSteelOrientationAngle codelist in the HS_S3DAssy_Codelist.xls workbook are shown below:

IJUAhsLeg1BeginOH::Leg1BeginOverhangValue

Specifies a numerical value for the distance that the first leg should overhang past the main member. To select the overhang value using Leg1BeginOverhangRule, do not type any value for this property.

IJUAhsLeg1BeginOHRl::Leg1BeginOverhangRule

Defines an HgrSupportRule that returns the distance that the first leg should overhang past the main member. The hanger rule should exist in the catalog; it can be a rule name or a ProgID. The rule must return the value in the DB Units (meters). To select the overhang value directly using Leg1BeginOverhangValue, do not type any value for this property.

IJUAhsLeg1BeginOHDef::Leg1BeginOverhangDefinition

Defines how the begin overhang should be measured. Allowed values are shown below:

IJUAhsLeg1BeginOHSel::Leg1BeginOverhangSelection

Uses the hsSelection codelist in the HS_S3DAssy_Codelist.xls workbook to select Leg1BeginOverhang by either input or rule. Allowed values are:

  • By Rule - 1 - Leg1BeginOverhangRule is used

  • By Input - 2 - Leg1BeginOverhangValue is used

IJUAhsLeg1EndOH::Leg1EndOverhangValue

Specifies the distance that the first leg should overhang past the supporting object. To select the value of the overhang using Leg1EndOverhangRule, do not type any value for this property.

IJUAhsLeg1EndOHRl::Leg1EndOverhangRule

Defines an HgrSupportRule that returns the distance that the first leg should overhang past the supporting object. The hanger rule must exist in the catalog; it can be a rule name or a ProgID. To select the value of the overhang directly using Leg1EndOverhangValue, do not type any value for this property.

IJUAhsLeg1EndOHDef::Leg1EndOverhangDefinition

Defines how the end overhang should be measured with respect to the supporting object. If you do not type any value, a default value of 1 is used. The following values are allowed:

IJUAhsLeg1EndOHSel::Leg1EndOverhangSelection

Uses the hsSelection Codelist in the HS_S3DAssy_Codelist.xls workbook to select Leg1EndOverhang by either input or rule. Allowed values are:

  • By Rule - 1 - Leg1EndOverhangRule is used

  • By Input - 2 - Leg1EndOverhangValue is used

IJUAhsCapPlate1::CapPlate1Part

Specifies the part number or the part class of the plate placed on the end of the first leg. This must be a plate SmartPart using the HS_S3DPlate.TwoStandardPort symbol.

IJUAhsCapPlate1Rl::CapPlate1Rule

Defines an HgrSupportRule that returns a part number or part class to use for the cap plate. The hanger rule must exist in the catalog; it can be a rule name or a ProgID. To specify the part directly using CapPlate1Part, do not type any value for this property. CapPlate1Rule can also be used to specify a custom part selection rule. If both CapPlate1Part and CapPlate1Rule are populated, then it is assumed that CapPlate1Rule is a part selection rule, which is then used to override the default part selection rule defined in the catalog for the part class specified in CapPlate1Part.

IJUAhsCapPlate1Ang::CapPlate1Angle

Specifies the angle to which the CapPlate1 should be rotated about the Z- axis of the port to which the plate is attached.

IJUAhsCapHorOffset::CapHorOffset

Specifies the offset by which the cap plate is moved horizontally.

IJUAhsCapVerOffset::CapVerOffset

Specifies the offset by which the cap plate is moved vertically.