Toggle Connection to Feature
Cycles through the available attachment types based on the feature and the support type.
Route Connection 1 |
Route Connection 2 |
Route Connection 3 |
Route Connection 4 |
Toggle Connection to Structure
Cycles through the available attachment types based on the supporting structure and the support type.
Structure Connection 1 |
Structure Connection 2 |
The following scenarios provide some examples of placing this assembly:
Place By Structure
-
Select the pipe.
-
Select the steel. The steel can be a beam, column, stiffener, reinforcing edge, and so on.
Placed on Sloped Steel
Perpendicular to Pipe |
Perpendicular to Structure |
Placed on Sloped Pipe
Perpendicular to Pipe |
Perpendicular to Structure |
Placed on a Reinforcing Edge
Placed on a Column
Place By Point
-
Select the pipe
-
Select the steel. The steel can be either two beams, two columns, two stiffeners, on slab, deck, or wall and one beam, column, or stiffener, or two slabs, decks, bulkheads, or walls.
-
Select the location for the support.
Placed on a Slab
Placed with Stiffener as Supporting Structure
The following example uses the overhang option; it adjusts to the supporting steel.
Placed with a Beam and a Slab as Supporting Structure
The following example uses the overhang option; it adjusts to the supporting steel.
Placed with a Corrugated Bulkhead as Supporting Structure
The following example includes a pipe.