HVACAssy_RectTypeR2 - Intergraph Smart 3D - Reference Data

Intergraph Smart 3D Hangers and Supports Assemblies

Language
English
Product
Intergraph Smart 3D
Subproduct
3D Symbols
Search by Category
Reference Data
Smart 3D Version
12 (2018)

Description: Frame Type R2
Assembly Name: HVAC_Assy,Ingr.SP3D.Content.Support.Rules.RectTypeR2
Workbook: HS_HVAC_Assy.xls
Workbook Sheet: HVACAssy_RectTypeR2
User Class Name: Frame Type R2
Part Number: HVACAssy_RectTypeR2_01
ProgID: HVAC_Assy,Ingr.SP3D.Content.Support.Rules.RectTypeR2

Support Placement Instructions

Use Place by Structure when the support is placed on horizontal duct running perpendicular to the supporting column.

  1. Click Place by Structure.

  2. Select the ducts.

  3. Select the beam.

  4. If the support is not placed in the correct orientation, use the Toggle Connection to Straight Feature and Toggle Connection to Structure buttons to change the orientation. There are up to four toggles.

Use Place by Point when the support is placed on horizontal duct running parallel to the supporting column

  1. Click Place by Point.

  2. Select the ducts.

  3. Optionally, select the beam.

  4. If the support is not placed in the correct orientation, use the Toggle Connection to Straight Feature and Toggle Connection to Structure buttons to change the orientation. There are up to four toggles.

Toggle Connection to Structure - Toggles the support to attach to the opposite face on the supporting steel section.

Toggle Connection to Straight Feature – Toggles the support to be reflected sections which face the opposite side of the duct.

Support Attributes

Attributes that are editable from the support's Property dialog box are italicized.

Interface Name: IJOAHgrHVACAssySecRule::SectionFromRule

Attribute User Name: Section From Rule

Description: Specifies whether section should be included based on the rule.

Interface Name: IJOAHgrHVACAssyLSize::LSectionSize

Attribute User Name: Section Size

Description: Section size which should be used for this support based on the section from rule.

Interface Name: IJOAHgrHVACAssyBOMDesc::BOM_DESC

Attribute User Name: BOM Description

Description: Input BOM description which will be given by the user.

Interface Name: IJOAHgrHVACAssyR2OH::HorOverhang

Attribute User Name: Horizontal Overhang

Description: Overhang to increase the horizontal section length.

Interface Name: IJOAHgrHVACAssyR2OH::VerOverhang

Attribute User Name: Vertical Overhang

Description: Overhang to increase the vertical section length.