-
When more than ten pipes are selected to place a support.
-
When pipes which have different slope angles are selected to place a support.
-
When the section type is RS Section and the connection type is Wrapping or Welded.
-
When the frame connection type is Wrapping or Welded and the frame height offset or the frame width offset is more than the section depth.
-
When L Type Corner Support is selected and the overhang option is set to adjust to supporting steel.
-
When a support is placed by structure and the overhang option is set to adjust to supporting steel.
-
When the overhang option is set to adjust to supporting steel and is placed on a slab, wall, or deck.
-
When type-T assembly is placed with frame connection type welded.
-
When a type- UV assembly is placed with Flat bar from Rule set to False and Flat bar Size selected as NULL.
-
When a type-U assembly is placed by point and by selecting only one supporting steel.
-
For a type- U assembly, if you set the snipped properties to Mitered and Wrapping connection type.
-
When the Section Size from Rule is set to False and the Section Size is selected as NULL.
-
When the new property Corner Overhang is not bulk loaded and the Overhang Option is set to User defined.