Options Tab (Duct Spool Generation Dialog) - Intergraph Smart 3D - Help

Intergraph Smart 3D HVAC

Language
English
Product
Intergraph Smart 3D
Subproduct
HVAC
Search by Category
Help
Smart 3D Version
12 (2018)

Lists the properties and values of the spool.

Spooling Basis

Lists the type of objects to be spooled. In plant mode, the only option is Ducting System. In marine mode, you also have the option to spool by Block.

Naming Rule

Specifies the naming rule for spools.

Delete Existing Spools

Choose False to maintain the existing spool objects. False is the default option. Choose True to delete the existing spool objects and create new spool objects to replace them.

Maximum Length

Provides the maximum length of a spool for oversizing calculation purposes.

Maximum Width

Provides the maximum width of a spool for oversizing calculation purposes.

Maximum Height

Provides the maximum height of a spool for oversizing calculation purposes.

Spool Break By Control Point

Specifies how spools should break.

Ignore Control Points - Ignores the control points during spooling and uses intrinsic or natural breaking points.

Break at Control Points - Breaks at the normal intrinsic line break and at control points.

Break Only at Control Points - Breaks only at control points, and disregards any intrinsic line breaks.

You place control points using the Insert > Control Point command. Set the control point Subtype to Duct Break Point.