Defines and modifies options for a split that divides a duct straight feature into two, or more, segments, or inserts flanges on non-straight features like turns and transitions.
Properties
Activates the Properties dialog box for the selected split. The default value for all properties is the last value that you used, except for those values from the end feature parameters. For more information, see Duct Split Feature Properties Dialog Box.
Select Feature
Selects the duct feature in which you want to insert a split.
Part
Provides a list of previously selected parts; or click More to access more parts.
Position
Positions the location to insert the split by dragging the part to that location.
Finish
Ends the split process.
Run
Defines the name of the duct run to which the split belongs. This box displays the duct runs that belong to the selected feature. Click More to browse for a duct run that is not in the list. For more information, see Select Duct Run Dialog Box. While inserting a split, you cannot create a new duct run.
Name
Provides a name for the new feature.
Split Mode
Defines the type of split to modify: Single Split or Multi Split. Use Single Split to break the duct into two segments. Use Multi Split to break the duct into multiple segments.
Reference
Defines the Start and End of the new feature.
Duct Length
Defines the length of the duct to split.
Depth Slope
Defines the slope angle to the depth axis. The Depth Slope box displays only if you select a split type that supports slope. Values range from -89 to 89.