Defines and modifies options for a split that divides a duct straight feature into two, or more, segments, or inserts flanges on non-straight features like turns and transitions.
Properties
Activates the Duct Split Feature Properties Dialog for the selected split. The default value for all properties is the last value that you used, except for those values from the end feature parameters.
Select Feature
Selects the duct feature in which you want to insert a split.
Part
Provides a list of previously selected parts; or click More to access more parts.
Position
Positions the location to insert the split by dragging the part to that location.
Finish
Ends the split process.
Run
Defines the name of the duct run to which the split belongs. This box displays the duct runs that belong to the selected feature.
<Select Graphically> allows you to select an existing run in a graphic view, or the Workspace Explorer.
<Load More Runs> loads all the runs that belong to the parent system. This option is not available after you load all the runs, or if the parent system contains less than 200 runs.
More displays the Select Duct Run Dialog. Use this option to select a duct run that is associated with a different ducting system.
Name
Provides a name for the new feature.
Split Mode
Defines the type of split to modify: Single Split or Multi Split. Use Single Split to break the duct into two segments. Use Multi Split to break the duct into multiple segments.
Reference
Defines the Start and End of the new feature.
Duct Length
Defines the length of the duct to split.
Depth Slope
Defines the slope angle to the depth axis. The Depth Slope box displays only if you select a split type that supports slope. Values range from -89 to 89.