AirFilterHumidifier Sheet - Intergraph Smart 3D - Reference Data - Hexagon PPM

Intergraph Smart 3D HVAC Reference Data

Language
English
Product
Intergraph Smart 3D
Subproduct
HVAC
Search by Category
Reference Data
Smart 3D Version
13

The AirFilterHumidifier sheet in the HVAC.xls workbook defines the air filter humidifiers that you want to have available in the Catalog.

PartNumber

Type the part number for the air filter humidifier. An example is AirFilterHumidifier400x200x275.

SHARED Tip Part numbers for air filter humidifiers must be unique throughout the entire Catalog.

SymbolDefinition

Type the symbol definition for the air filter humidifier.

FaceWidth

Type the face width for the damper for the air filter humidifier.

FaceDepth

Type the face depth for the damper for the air filter humidifier.

ComponentType

Type the component type for the air filter humidifier.

PartDescription

Type a description for the type of part. An example is Air Filter Humidifier400x200 x180mm.

Width

Type the width of the duct for the air filter humidifier.

Depth

Type the depth of the duct for the air filter humidifier.

Length

Type the length of the air filter humidifier.

Thickness

Type the thickness for the air filter humidifier.

FlangeWidth

Type the width for the flange.

SHARED Tip For the remaining properties, (i) indicates an integer corresponding to a nozzle number assigned to the cross section. This method avoids a lengthy listing for all possibilities, like Nozzle(1):CrossSection, Nozzle(2):CrossSection, and Nozzle(3):CrossSection for three possible nozzles. When you type the nozzle properties in the workbook, substitute a number for i to assign the nozzle to the appropriate property.

Nozzle(i):CrossSection

Type the related CrossSection object for the port.

Nozzle(i):EndPrep

Type the coded end preparation for the particular nozzle. Examples of end preparations include Threaded, Screwed, Plain End, Welded, Bolted, Female, Male, and Ferule. In the reference data, a number represents each type of end preparation (for example, 1 for Threaded, 2 for Screwed and so on).

Nozzle(i):Thickness

Type the thickness of the nozzle port.

Nozzle(i):FlangeWidth

Type the air filter width for the nozzle.

Nozzle(i):FlowDirection

Type the flow direction for the nozzle.

Nozzle(i):PortDepth

Type the depth of the port for the nozzle.

Nozzle(i):CptOffset

Type the offset value for the component.