The Rect_Rivet sheet in the HVAC.xls workbook defines the rectangular rivets that you want in the Catalog.
Type the part number for the rivet. An example is RectRivet for rectangular rivet.
Part numbers for rectangular rivets must be unique throughout the entire Catalog.
Type the face depth for the object.
Type the face width for the object.
Type the component type for the rivet.
Type a description for the rivet.
Type the symbol definition for the rivet.
Type the width of the duct.
Type the depth of the duct.
For the remaining properties, (i) indicates an integer corresponding to a nozzle number assigned to the cross section. This method avoids a lengthy listing for all possibilities, like Nozzle(1):CrossSection, Nozzle(2):CrossSection, and Nozzle(3):CrossSection for three possible nozzles. When you type the nozzle properties in the workbook, substitute a number for i to assign the nozzle to the appropriate property.
Type the related CrossSection object for the port.
Type the coded end preparation for the nozzle. Examples of end preparations include Threaded, Screwed, Plain End, Welded, Bolted, Female, Male, and Ferule. In the reference data, a number represents each type of end preparation (for example, 1 for Threaded, 2 for Screwed and so on).
Type the thickness of the nozzle port.
Type the sleeve width for the nozzle.
Type the flow direction for the nozzle.
Type the depth of the port for the nozzle.
Type the offset value for the component.