The Rect_FlatFlangeVA sheet in the HVAC.xls workbook organizes facts for rectangular sloped flanges.
Type the part number for the flange. An example is Rect_SlopedFlange for rectangular sloped flange.
Type the face depth for the coil.
Type the face width for the coil.
Type the component type for the rectangular flat flange.
Type a description for the rectangular flat flange.
Type the symbol definition for the rectangular flat flange.
Type the width of the duct.
Type the depth of the duct.
Type the clearance for the rectangular flat flange.
Type the width of the flange.
Type the thickness for the flange.
Type the thickness for the compressed gasket.
For the remaining properties, (i) indicates an integer corresponding to a nozzle number assigned to the cross section. This method avoids a lengthy listing for all possibilities, like Nozzle(1):CrossSection, Nozzle(2):CrossSection, and Nozzle(3):CrossSection for three possible nozzles. When you type the nozzle properties in the workbook, substitute a number for i to assign the nozzle to the appropriate property.
Type the related CrossSection object for the port.
Type the coded end preparation for the nozzle. Examples of end preparations include Threaded, Screwed, Plain End, Welded, Bolted, Female, Male, and Ferule. In the reference data, a number represents each type of end preparation (for example, 1 for Threaded, 2 for Screwed and so on).
Type the thickness of the nozzle port.
Type the flange width for the nozzle.
Type the flow direction for the nozzle.
Type the depth of the port for the nozzle.
Type the offset value for the component.