HsqrThroatElbow Sheet - Intergraph Smart 3D - Reference Data - Hexagon PPM

Intergraph Smart 3D HVAC Reference Data

Language
English
Product
Intergraph Smart 3D
Subproduct
HVAC
Search by Category
Reference Data
Smart 3D Version
13.1

The HsqrThroatElbow sheet in the HVAC.xls workbook defines the square throat elbows that you want in the Catalog.

PartNumber

Type the part number for the elbow. An example is HVACsqrThroatElbow01.

PartDescription

Type a description for the elbow.

SymbolDefinition

Type the symbol definition for the elbow.

ComponentType

Type the component type for the elbow.

DryWeight

Type the empty weight of the elbow. You must specify the type of units when you enter this value.

WaterWeight

Type the water weight of the elbow. You must specify the type of units when you enter this value.

DryCogX

Type the center-of-gravity location for the elbow along the X-axis when the elbow is empty.

DryCogY

Type the center-of-gravity location for the elbow along the Y-axis when the elbow is empty.

DryCogZ

Type the center-of-gravity location for the elbow along the Z-axis when the elbow is empty.

Width

Type the width of the elbow.

Depth

Type the depth of the elbow.

Throat1

Type the dimension for the first throat.

Throat2

Type the dimension for the second throat.

PlaneOfTurn

Specify the plane for a turn in the elbow.

SHARED Tip For the remaining properties, (i) indicates an integer corresponding to a nozzle number assigned to the cross section. This method avoids a lengthy listing for all possibilities, like Nozzle(1):CrossSection, Nozzle(2):CrossSection, and Nozzle(3):CrossSection for three possible nozzles. When you type the nozzle properties in the workbook, substitute a number for i to assign the nozzle to the appropriate property.

Nozzle(i):CROSSSECTION

Identify the cross section for the nozzle. OCS-4 is an example. The HvacSpecDefaults sheet lists the valid cross sections.

Nozzle(i):EndPrep

Type the coded end preparation for the particular nozzle. Examples of end preparations include Threaded, Screwed, Plain End, Welded, Bolted, Female, Male, and Ferule. In the reference data, a number represents each type of end preparation (for example, 1 for Threaded, 2 for Screwed and so on).

Nozzle(i):Thickness

Type the thickness of the nozzle port.

Nozzle(i):FlangeWidth

Type the flange width for the nozzle.

Nozzle(i):FlowDirection

Type the flow direction for the nozzle.<