Place a radial plane - Intergraph Smart 3D - Help

Intergraph Smart 3D Grids

Language
English
Product
Intergraph Smart 3D
Subproduct
Grids
Search by Category
Help
Smart 3D Version
11 (2016)
  1. Click Place Radial Grids on the vertical toolbar.

  2. In the CS box, select the coordinate system to which the radial grid plane belongs.

  3. In the Axis box, select R to indicate that you are placing a radial plane.

  4. In the Reference box, select a reference object.

  5. In the Offset box, key in the offset, in degrees, from the reference object. The offset must be less than 180-degrees.

Radial planes are placed across the entire radial cylinder. Therefore, you cannot place a plane that is equal to or greater than 180-degrees (the 0-degree plane is the 180-degree plane, the 45-degree plane is the 135-degree plane, and so forth).