-
Click Place Radial Grids command
on the vertical toolbar.
-
In the CS box, select the coordinate system to which the radial grid planes belong.
-
In the Axis box, select R to indicate that you are placing radial planes.
-
In the Reference box, select the reference object from which to place the first plane.
-
In the Copies box, type the number of copies to place.
-
In the Offset box, type the offset, in degrees, between the grid planes.
Radial planes are placed across the entire radial cylinder. Therefore, you cannot
place a plane that is equal to or greater than 180-degrees (the 0-degree plane is
the 180-degree plane, the 45-degree plane is the 135-degree plane, and so forth).
Be careful when you specify the offset and number of copies values that you do not
define a plane past the 180-degree point.