-
Click Place Radial Grids command on the vertical toolbar.
-
In the CS box, select the coordinate system to which the radial grid plane belongs.
-
In the Axis box, select R to indicate that you are placing a radial plane.
-
In the Reference box, select a reference object.
-
In the Offset box, key in the offset, in degrees, from the reference object. The offset must be less than 180-degrees.
Radial planes are placed across the entire radial cylinder. Therefore, you cannot place a plane that is equal to or greater than 180-degrees (the 0-degree plane is the 180-degree plane, the 45-degree plane is the 135-degree plane, and so forth).