Place a foundation port - Intergraph Smart 3D - Help

Intergraph Smart 3D Equipment and Furnishings

Language
English
Product
Intergraph Smart 3D
Subproduct
Equipment and Furnishings
Search by Category
Help
Smart 3D Version
12.1 (2019)
  1. Click Place Nozzle Command on the vertical toolbar.

  2. Select the parent equipment or equipment component to which to add a nozzle. The Nozzle Properties Dialog displays.

  3. On the Occurrence Tab (Nozzle Properties Dialog), select Foundation Port as the type of nozzle to place from the Port Type list.

    The properties and values update to reflect those for foundation ports. See Foundation Port Properties Dialog.

  4. On the Occurrence Tab (Nozzle Properties Dialog), in the Value grid, type values for the listed properties.

    SHARED Tip The Type property selection updates the other properties in the grid. For more information on the property changes per type, see Occurrence Tab (Foundation Port Properties).

  5. Click the Location Tab (Nozzle Properties Dialog), and select a placement type from the Placement Type list box.

    If you select the Position by Point placement type, the z-axis appears with the foundation port during placement for more precise orientation with the equipment object.

  6. In the Value grid, type the values for the listed properties. These location properties are dimensions relative to the selected parent.

  7. Click OK.

    The dialog closes, and you return to the model to place the foundation port

  • Press the left or right arrow keys to rotate the foundation port by 90-degree increments at any time during the placement operation. Press the up arrow to scroll through the three possible axes of rotation. Press the down arrow key to scroll to each datum point.

  • To edit the properties of the new foundation port, right-click the foundation port and select Properties.