Sets options for placing a nozzle on a designed equipment object.
Placement Type
Specifies a location type for the nozzle. The following location types are available for nozzles:
Radial
Straight nozzle with nozzle centerline on the radial plane.
Tangential
Straight nozzle on the radial plane, but the nozzle centerline does not intersect the vessel axis.
Axial
Straight nozzle normal to radial plane.
Skew
Straight nozzle that is tilted from both the radial plane and the vessel axis.
Axial Elbow
Elbow nozzle with hub centerline normal to the radial plane.
Radial Elbow
Elbow nozzle placed with the hub radial to the vessel axis.
Offset Radial Elbow
Elbow nozzle placed with the hub tangential to the vessel axis.
Offset Skew
Skew nozzle with a parallel offset in the radial plane.
Position by Plane and Axis
Places the nozzle at the intersection of the selected plane and axis. Available only for nozzles that have the same shape or design solid as the orientation reference.
Position by Point
Places the nozzle at the location you select with respect to the active coordinate system. Available with all Nozzles including PipePort (No Added Graphic) and HvacPort (No Added Graphic).
Property
Identifies the location parameters of the selected nozzle.
Value
Shows the current values for all location parameters of the selected nozzle. You can modify these values after the initial placement of the nozzle to reflect exact design needs or deviations from the standard part.