Displays the route of the cable run. This tab is only available if the cable has been routed.
Method
Specify how you want to view the cable run route.
Cableways
Lists all the cableway junctions that the cable run passes through. The cableway junctions are named after the cableway or conduit run names and the end of the cableway or conduit run that the cable run passes.
All Hangers
Lists all hangers supporting the cableways that the cable run route passes through.
Key Hangers
Lists only the hangers that are closest to the entry and exit points and any branch points.
Markers
Lists the cable markers on the cable run.
Name
Displays the name of the object.
Location X
Displays the X-coordinate location of the hanger, marker, and cableway junction in the active coordinate system.
Location Y
Displays the Y-coordinate location of the hanger, marker, and cableway junction in the active coordinate system.
Location Z
Displays the Z-coordinate location of the hanger, marker, and cableway junction in the active coordinate system.
Distance
Displays the distance from where the cable run enters the cableway system to the hanger. The distance is measured along the centerline of the cableway and includes any tail 1 length that was specified at creation.